2018 New Automatic High Speed Thread Rolling Machine for Bolt

Reinforced straight thread rolling machine (40, 40B, 40B2, 40C, 40G, 40G2, 50B.

Seven model)

Reasonable design, easy to use and maintenance, it only takes 5 minutes to replace the tool.

The tool adopts automatic opening and closing structure, the steel bar is clamped at one time, the wire is finished in 30 seconds, and the market is high.

The use of rolling process, steel wire head processing "mold" high precision, qualified rate of 100%

The strength of the silk head is higher than that of the base material without cutting the base material.
Use a wide range, machinable φ12mm-φ50mm HRB335 grade and HBR400 grade ribbed bar.
By the provincial construction engineering quality Supervision and Inspection center inspection, reached the jgjl07-96 of a-level joint standards.
Standard type, positive and negative wire buckle type, different diameter type three series, 52 varieties,

It can meet the requirement of the same diameter, the different diameter, the adjustable length and the direction of the steel bar in any part of the building structure, such as transverse, vertical and oblique. 
Name specification main function introduction rolling wheel φ16-φ22 straight thread steel wire head 2# rolling φ25-φ32 straight thread steel wire head 3# rolling φ36-φ40 straight thread reinforcing wire head stripping rib knife 8x24x25 removing longitudinal rib and transverse rib of steel bar Measuring φ16-φ40 inspection of steel wire head processing quality work wrench 32/40X75 tightening rebar joint

 

 

Manual Automatic Type:

 

 

 

Pneumatic set wire machine (automatic) Automatic rolling wire machine, clamping sets of wire are used hydraulic feed, the largest diameter of 40mm, machinable 14-40 specifications GB thread, rebar and round steel machinable, working fast, simple operation, easy to adjust, is a professional steel processing plant preferred products. It is mainly used in the construction of ribbed steel rolling straight thread head, which is the key equipment to realize the connection of rebar. Machinable diameter 16-40mm HRB335 and HRB400 grade ribbed bar straight thread Sleeve wire machine hgs-40b-type reinforced straight thread stripping rib rolling machine, can be used to complete the stripping rib, screw thread processing, processing teeth full, high dimensional accuracy. Can be machined positive buckle thread, also can be processed back thread. The machine is simple in operation, compact in structure, reliable in use, and has unique automatic opening and closing mechanism of tool. It is mainly used in the processing of straight thread head with ribbed rebar in building engineering, and is the key equipment to realize the connecting process of rebar straight thread. HGS-40B-type rebar straight thread rolling machine consists of frame, clamp clamp, rail, skateboard, cycloid reducer, rib rolling head, feeding mechanism, automatic opening and closing mechanism, travel limit mechanism, cooling system, electrical control box, control system and other parts of 1. It is more reasonable to design the spiral angle, and it is more convenient and quick to operate, In particular, it overcomes the problem that the first generation products can not be solved by the high pitch accumulation error. So that the connection strength is higher. 2. It takes only 2 minutes to adjust the wire head size. 3. It takes only 5 minutes to replace the roller or adjust it to the back wire. 4. Saving roller and ribbed blades, So that the cost of processing is lower. 5. Because of the use of the spiral angle structure, so that the operation of labor-saving, well received by operators like. 6. Wide range of applications, machinable φ16-φ40mmhrb400 and HRB500 grade ribbed bar.

 

Pneumatic automatic type:

 

 

Bar upsetting Machine
Full-automatic hydraulic rebar Head Pier Coarse machine, the use of advanced hydraulic system and electric structure, new products, new technology, just press the last power button, the overall upsetting work one-time completion, high processing accuracy, quality assurance. Our products have been through market research and comprehensive innovation and site customers to check the layer, hydraulic pressure using ultra-high pressure (80MPa), low flow (5.42l/min), Low energy consumption (4KW).
High precision, good performance, excellent quality, put on the market, deeply praised by the vast number of users! The principle of cold upsetting is used to make the end of steel bar plastic deformation, increase 4~6mm diameter and then process the thread. The actual section area of the thread after machining is larger than the section area of the original steel bar, and the tensile strength of the joint is greatly improved.
This upsetting thread joint was tested by tensile test, which is suitable for construction, road and bridge, high speed railway and power station engineering; Simple operation, aspect, the shortest professional training can mount the operation

 

If you are interested in our products, please feel free contact us.

 

Tel :+86-13180017097

Reinforced straight thread rolling machine (40, 40B, 40B2, 40C, 40G, 40G2, 50B.

Seven model)

Reasonable design, easy to use and maintenance, it only takes 5 minutes to replace the tool.

The tool adopts automatic opening and closing structure, the steel bar is clamped at one time, the wire is finished in 30 seconds, and the market is high.

The use of rolling process, steel wire head processing "mold" high precision, qualified rate of 100%

The strength of the silk head is higher than that of the base material without cutting the base material.
Use a wide range, machinable φ12mm-φ50mm HRB335 grade and HBR400 grade ribbed bar.
By the provincial construction engineering quality Supervision and Inspection center inspection, reached the jgjl07-96 of a-level joint standards.
Standard type, positive and negative wire buckle type, different diameter type three series, 52 varieties,

It can meet the requirement of the same diameter, the different diameter, the adjustable length and the direction of the steel bar in any part of the building structure, such as transverse, vertical and oblique. 
Name specification main function introduction rolling wheel φ16-φ22 straight thread steel wire head 2# rolling φ25-φ32 straight thread steel wire head 3# rolling φ36-φ40 straight thread reinforcing wire head stripping rib knife 8x24x25 removing longitudinal rib and transverse rib of steel bar Measuring φ16-φ40 inspection of steel wire head processing quality work wrench 32/40X75 tightening rebar joint

 

 

Manual Automatic Type:

 

 

 

Pneumatic set wire machine (automatic) Automatic rolling wire machine, clamping sets of wire are used hydraulic feed, the largest diameter of 40mm, machinable 14-40 specifications GB thread, rebar and round steel machinable, working fast, simple operation, easy to adjust, is a professional steel processing plant preferred products. It is mainly used in the construction of ribbed steel rolling straight thread head, which is the key equipment to realize the connection of rebar. Machinable diameter 16-40mm HRB335 and HRB400 grade ribbed bar straight thread Sleeve wire machine hgs-40b-type reinforced straight thread stripping rib rolling machine, can be used to complete the stripping rib, screw thread processing, processing teeth full, high dimensional accuracy. Can be machined positive buckle thread, also can be processed back thread. The machine is simple in operation, compact in structure, reliable in use, and has unique automatic opening and closing mechanism of tool. It is mainly used in the processing of straight thread head with ribbed rebar in building engineering, and is the key equipment to realize the connecting process of rebar straight thread. HGS-40B-type rebar straight thread rolling machine consists of frame, clamp clamp, rail, skateboard, cycloid reducer, rib rolling head, feeding mechanism, automatic opening and closing mechanism, travel limit mechanism, cooling system, electrical control box, control system and other parts of 1. It is more reasonable to design the spiral angle, and it is more convenient and quick to operate, In particular, it overcomes the problem that the first generation products can not be solved by the high pitch accumulation error. So that the connection strength is higher. 2. It takes only 2 minutes to adjust the wire head size. 3. It takes only 5 minutes to replace the roller or adjust it to the back wire. 4. Saving roller and ribbed blades, So that the cost of processing is lower. 5. Because of the use of the spiral angle structure, so that the operation of labor-saving, well received by operators like. 6. Wide range of applications, machinable φ16-φ40mmhrb400 and HRB500 grade ribbed bar.

 

Pneumatic automatic type:

 

 

Bar upsetting Machine
Full-automatic hydraulic rebar Head Pier Coarse machine, the use of advanced hydraulic system and electric structure, new products, new technology, just press the last power button, the overall upsetting work one-time completion, high processing accuracy, quality assurance. Our products have been through market research and comprehensive innovation and site customers to check the layer, hydraulic pressure using ultra-high pressure (80MPa), low flow (5.42l/min), Low energy consumption (4KW).
High precision, good performance, excellent quality, put on the market, deeply praised by the vast number of users! The principle of cold upsetting is used to make the end of steel bar plastic deformation, increase 4~6mm diameter and then process the thread. The actual section area of the thread after machining is larger than the section area of the original steel bar, and the tensile strength of the joint is greatly improved.
This upsetting thread joint was tested by tensile test, which is suitable for construction, road and bridge, high speed railway and power station engineering; Simple operation, aspect, the shortest professional training can mount the operation

 

If you are interested in our products, please feel free contact us.

 

Tel :+86-13180017097

Crane Components

Crane Components,Construction Vehicle Fluid Pump,Hydraulic Diesel Vehicle Gear Pump,Power Transmit Instrument Crane Gear Box

HENAN MAJOR INDUSTRIES IMP. & EXP. CO., LTD. , https://www.henanminingcrane.com