![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The first thing to do when a new car lands is to buy a fully-enclosed three-dimensional floor mat to enhance the grade of the car. However, it is only a little bit of knowledge and has to search the Internet to find a brand that claims to have tens of millions of owners. To be honest, I didn’t believe it at first, then I went to a circle with my friends and found that a lot of people were using this product. When I was curious, I directly asked for the reason for the purchase. Most of the people said that they were very docile and went through each The test is safe. Summarized briefly, nothing more than good craftsmanship and materials, and just two of these are the top priorities for buying car mats.
Process is good: one mold
At present, there are two different production processes for full-envelope foot pads on the market. One is splicing, and the other is molding in one piece.
Splicing: This foot pad is not really dedicated to the car, after all, just a few pieces of material sutured together, soft sturdy shape does not say, and the use of time is prone to cracking. The most important thing is the irregular shape of the car chassis. It does not show up.
Compression molding in one piece: The foot pad adopting this technology is firm and beautiful, and the concave is concave. The convex convex is exactly docile, waterproof and wear-resistant for a long time without deformation, it is really special for the car, no safety hazard.
Wufu Jinniu's products use compression molding in one molding technology. It adopts international advanced "Aurora 3D measurement" technology and equipment for data acquisition and then uses advanced CNC lathes to open molds and plates, and the error is controlled at 0.01cm. With accurate data and precise molds, the bottom of the fully-enveloped mat is finally produced by integral molding of the die, which ensures that each batch of product is exactly the same and the same effect is used in each vehicle.
Good material: all environmental protection materials
It is difficult for a clever woman to be without rice. If the production process is very good but there is no raw material, it is difficult to make a product with excellent quality.
To ensure that the product is environmentally friendly, it is necessary to use XPE, leather, sponge, glue, non-skid bottom, etc. for the production of floor mats. You need to do layer inspections. You know that buying car mats is not only not exceeding formaldehyde, but also , Wufu Taurus pads are very hard, do 145 analysis of carcinogenic toxic substances, so buy foot pads still have to see the product has no CE certification, CQC certification, RoHS certification, SGS test report these authoritative tests.
Preventing the displacement of the foot pad not only requires a procedural guarantee, but also makes the requirements for the non-slip layer material extremely harsh. The patented technology of Gecko's claws allows the needles to penetrate deep into the suede fibers on the underside of the car and firmly grasps the suede on the underside of the car. The non-slip performance of a soft nail with a square meter of 100 can't be compared with a square meter of 128005 and a gecko paw. Than to ensure that the mat does not shift.
A foot pad is popular, in fact, it can meet the needs of the owners. Owners who buy mats are nothing more than want to not affect traffic safety and physical health, so when buying mats, from the production process and materials to examine the quality of the product in two aspects, choose a big brand is more appropriate.
This series of beverage filling machines are semi-automatic piston filling machines. A piston is driven by a cylinder to suck and eject materials, a one-way valve is used to control the flow of materials, and a magnetic switch is used to control the stroke of the cylinder to adjust the filling volume.
2. This series of models has reasonable design, small size and convenient operation. The pneumatic part adopts AirTac pneumatic components.
3. The material contact parts are made of 304 stainless steel material, which meets the requirements of GMP.
4. The filling volume adjustment handle and filling speed can be adjusted arbitrarily, and the filling precision is high.
5. The filling head adopts anti-drip, anti-drawing and lifting filling device.
6. The hopper is equipped with a speed-adjustable stirring device to make the material more evenly filled.
This paste Filling Machine adopts photoelectric automatic and manual control system, a unique piston-type filling form, not only a continuous filling, but also free filling. Horizontal mixing structure, and ensure the full mix butter and oil, greatly improve the performance and measurement accuracy of filling.
This 50ml sauce filling machine is designed mainly for the food industry sauce into separate bottles , especially suitable for seasoning, and the concentration of larger particles with a chili sauce, bean paste, peanut butter, sesame, jam, butter pot at the end of material, marked oil pot at the end of material viscous material such as sauce filling.
We also have other types: the filling machine with different nozzels, filling machine with mixer etc.
Hot Sauce Bottling Machine, Chili Sauce Bottling Machine
Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com