Five Tips for Constant Temperature and Humidity Incubator Cleaning

The constant temperature and humidity incubator is an important experimental equipment in the laboratory and a training device for creating the environment required for life science research. It can be seen in many research experiments. In order to ensure the test results, we need to clean the constant temperature and humidity incubator inside and outside after each use. The more sophisticated the equipment, the more necessary maintenance, the following is a brief introduction to the five tips for constant temperature and humidity incubation tank cleaning.

1. Tip 1: Do not use acid-base corrosive solvents for internal cleaning. The inside of the constant temperature and humidity incubator is often used for placing plants, seeds, etc. Therefore, it is best to clean the interior to avoid mutual interference. When cleaning the inside of the cabinet, remember not to use an acid-base corrosive solvent for cleaning, which can prevent rust inside the box and affect the operation.

2. Tip 2: Clean the impurities inside the cabinet. Use professional cleaning agent. As the usage time is normal, many impurities will accumulate inside the cabinet. At this time, in order to thoroughly clean these impurities, we need to use a professional cleaning agent for the cabinet. Clean and then dry.

3. Tip 3: The water storage in the humidifier should be replaced once a month. The humidifying water tray should be cleaned once a month. The constant temperature and humidity incubator has the functions of temperature control and humidity control, while the humidification of the constant temperature and humidity incubator mainly relies on the humidifier. In order to ensure the cleanliness of the water, not only the water stored in the humidifier should be replaced once a month, but also the humidifying water tray should be cleaned once a month, so as to ensure smooth and smooth water flow and clean air in the cabinet.

4, Tip 4: distribution room, condenser cooling mesh dust should be regularly cleaned in the constant temperature and humidity incubation box in the process of use, the distribution room, condenser cooling mesh will gradually accumulate dust, excessive dust will affect the equipment Heat dissipation, which in turn affects the service life of the equipment. Therefore, it should be cleaned at least once a year for the dust in the distribution room and the condenser cooling net. It is better to use the vacuum cleaner to remove the indoor dust.

5. Tip 5: The outside of the cabinet is regularly cleaned. The effect of the outside of the cabinet on the working temperature of the constant temperature and humidity incubator is not great, but it will affect the aesthetics of the cabinet and the observation of the test inside the box. Therefore, the maintenance process In the middle, it is also necessary to clean the outside of the cabinet regularly, and the cleaning frequency is determined according to the actual situation.

The above is the "five tips for constant temperature and humidity incubation tank cleaning" brought by the agricultural instrument network . I hope that the above contents will help you to maintain and maintain the constant temperature and humidity incubator.

Window Goods

Simulation Oriole garden ornaments decoration Huangli photography props Feather animal Branch Accessories model.Spot special price 3cm Mini feather bird promotion,20-25cm ostrich hair hard pole color high quality ostrich feather scene decoration table lamp ceiling lamp decoration.

Window Goods,Shop Window Video Display,Decor Shop Window Display,Window Cling Craft Kits

Xintong Craft Gift Co.,LTD , https://www.jlxtcraft.com