High Quality Compact Short Hydraulic Cylinder

Model NO.: HC389
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Product Name: Lightweight Compact Hydraulic Cylinder
Cylinder Case/Tube Material: Carbon Steel, Alloy Steel, Stainless Steel
Working Medium: Hydraulic Oil
Working Pressure: 5-300MPa
Available Temperature: -40ºC to + 300ºC
Maximum Stroke: Stroke Fortie-Rod Hydraulic Cylinder ≤18000mm
Honed Tube: 20-2000mm, Heat Treatment, Honing, Rolling
Piston Rod for Tie-Rod Cylinder: 10-1500mm, Tempering, Plated Nickel, Chrome
Surface Coating: Sandblasting, Primer Paint, Middle Paint, Finish P
Piston Speed: Maximum 1m/S
Trademark: OEM
Transport Package: Wooden Box
Specification: CX Compact Hydraulic Cylinder
Origin: China, Jiangsu
HS Code: 841221000
Model NO.: HC389
Double-Acting Cylinder Type: Common Cylinder
Special Cylinder Type: Number of Cylinders
Combination Cylinder Type: Gas-Liquid Pressurized Cylinder
Product Name: Lightweight Compact Hydraulic Cylinder
Cylinder Case/Tube Material: Carbon Steel, Alloy Steel, Stainless Steel
Working Medium: Hydraulic Oil
Working Pressure: 5-300MPa
Available Temperature: -40ºC to + 300ºC
Maximum Stroke: Stroke Fortie-Rod Hydraulic Cylinder ≤18000mm
Honed Tube: 20-2000mm, Heat Treatment, Honing, Rolling
Piston Rod for Tie-Rod Cylinder: 10-1500mm, Tempering, Plated Nickel, Chrome
Surface Coating: Sandblasting, Primer Paint, Middle Paint, Finish P
Piston Speed: Maximum 1m/S
Trademark: OEM
Transport Package: Wooden Box
Specification: CX Compact Hydraulic Cylinder
Origin: China, Jiangsu
HS Code: 841221000

Lightweight Compact Hydraulic Cylinder
 

Whatever our cylinders will applied in-mining and drilling(impact load, heavy duty, dust), marine and offshore(extreme corrosive, low temperature), testing equipment(high speed and frequency) our rich experience in sealing technology, surface technology, structure design makes our products extremely durable, which means a longer service life and lower maintenance costs.
 



High Quality Compact Short Hydraulic Cylinder

Customer build 
is the first principle for Betten Hydraulic


We can design piston hydraulic cylinder for what you want if you can provide us the following technical parameters: 

1. Bore Diameter; 

2. Piston Diameter; 

3. Stroke; 

4. 
Working pressure; 

5. Installation Distanc


Technical Data 

 
Series name  CX Compact Hydraulic Cylinder(Double Acting) 
Nominal pressure  16MPa 
Equipment type  Standard: SA, FA, FB  Foot type: LD 
Inner diameter 
Φ32, φ40, φ50, φ63, φ80, φ100,  
Φ125, φ140, φ150, φ160 
Φ32, φ40, φ50, φ63 
Maximum allowable pressure  16MPa 
Test resistance pressure  21MPa 
Minimum operating pressure  Below 0.64MPa 
Rod tip screw  JIS 6H/6g 
Usable temperature range  Standard specifications:  
Φ32~φ125: -10ºC~+120ºC (H-NBR) 
Φ140~φ160: -10ºC~+80ºC (NBR) 
LD: -10ºC~+120ºC (H-NBR) 
Applicable hydraulic oils  General mineral hydraulic oils (If using other hydraulic oils, then please specify as such elsewhere) 



Main Features


1. Seal kits: From USA, durable and hard-wearing to ensure the small hydraulic cylinder a long service life.

2. Heat treatment: Quenching&Tempering which makes the piston rod super high hardness.

3.
 Cleaning: Ultrasonic cleaning.

4. 
Cutting: High precision provided by automatic roller cutting machine.

5. 
Testing: Ultrasonic detector, spectrograph, CMM, metallography, chrome thickness tester.

6. 
Advantage: Simple structure & reliable work, easy maintenance & diverse connecting ways of small hydraulic cylinder.

7.
 Plan: Different manufacturing plans for different customers.

8. 
MOQ: 10 PCS of small hydraulic cylinders

9.
 Lead time: 10~30 days depends on the small hydraulic cylinder quantity & whether customized.

10. 
Warranty: Change a new small hydraulic cylinder and we pay for the air freight in 2 years warranty time.

High Quality Compact Short Hydraulic Cylinder



Mounting Types 

High Quality Compact Short Hydraulic Cylinder

Packaging & Delivery


Delivery time depends on the destination and other factors, it may up to 7 work days. 
In order to ensure you receive you order tax free upon import, we will declare it as a "Sample"with a lower value. This lower price does not reflect the total price you paid. 
After we ship the goods, we will email you the shipping information, as well as tracking number.  
WEIGHT  RECOMMENDED TRANSPORT MEANS  TRANSPORT TIME  COMMENTS 
<50kg  Express-UPS/DHL/FedEx 
Door to door service 
3-7 days  Fast 
Convenient 
Expensive 
50-150kg  By air  3-10 days  Fast;  
Economic;  
Consignee has to do customs clearance 
150>kg  By sea  10-50 days  Slow;  
Economic;  
It takes some time for customs declarance and clearance 
2X20' or 1X40'  By rail  20-35 days  Slow;  
Economic;  
It takes some time for customs declarance and clearance;  
Only full container load accepted ( MOQ: 2X20' or 1X40' )  



High Quality Compact Short Hydraulic Cylinder



Our Company

Betten Hydraulic-Built Cylinders to Fit Your Needs
As an experienced Hydraulic Cylinder Manufacturer, Betten Machinery is built to develop the overseas business of Boli Hydraulic & Pneumatic Technology Co., Ltd which is known as a professional manufacturer of Oil Cylinder, Pneumatic Cylinder, Hydraulic System and Related Spare Partsin East China. 

Our factory cover an area of over 5000 square meters and have around 100 stuff including a technical team with more than 20 engineers. Our workshop equipped with over 30 sets of manufacturing and testing machines including machining center, numerical control machine, argon welding machine, plasma cutter etc. Betten has gained the certification of ISO 9001: 2008 and certification of Product Quality Supervision and Inspection Center of Wuxi City. Meanwhile, Betten also got customers' satisfaction for reasonable price, timely delivery and good after-sale service. 

With the fast development in the past 20 years, we have gained much experience and technology in making various types of Tractor hydraulic cylinder with our expert team. Our products are widely used in equipment such as machine tool, metallurgical equipment, forging machine, kiln equipment, brick machine, plastic machine, car manufacturing machine, construction equipment for road and bridge, wielding machine, port facilities, test machine, fully auto line and we have gained a lot of world famous customer like XCMG, LIUGONG Machinery, Chalco, BOSCH, Haier, SAINT-GOBAIN, Shanghai Boiler, HTC etc. 

High Quality Compact Short Hydraulic Cylinder




Manufacturing Process

Each Betten Hydraulic RAM has suffered rigorous process and inspection to promise the good quality for our customer. 

1). Design Services

Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support. 

2). Product Services

Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping


3). Samples Procedure

We could develop the sample according to your requirement and amend the sample constantly to meet your need. 


4). Research & Development

We usually research the new needs of the market and develop the new model when there is new cars in the market. 


5). Quality Control

Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949. 


6). Certification

Should your products require testing and certification to comply with international standards, we can arrange this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's Register or the testing company of your choice. 


Hydraulic Cylinder Spare Parts

Piston Rod, seal kits, spherical plain bearing, tubes/pipes, etc. 

High Quality Compact Short Hydraulic Cylinder
FAQ

1. Are you trading company or manufacture? 

We are a manufacture for Hydraulic Cylinders and shock absorber piston rod with more than 20 years' history. 

2. Would you accept the production for small batches? 

Of course, we would accept it. We also could provide the sample for you. 

3. Hydraulic cylinder internal leakage? 

There are 3 main reasons causing internal leakage: Overload, polishing is not well controlled, bad seal kits. As is known to all, vehicles in China are often overload, our products all designed to bear the overload power. We have numerical control machine to assure the Polish processing. 

4. Does your piston rod get ruptured easily? 

Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness. 

 

Contact

Pls for free cantact Ciel liang

Tel +8615906192739

  

If you want to konw more about us, pls check our official website:

http://www.betten-hydraulic.com/

Lightweight Compact Hydraulic Cylinder
 

Whatever our cylinders will applied in-mining and drilling(impact load, heavy duty, dust), marine and offshore(extreme corrosive, low temperature), testing equipment(high speed and frequency) our rich experience in sealing technology, surface technology, structure design makes our products extremely durable, which means a longer service life and lower maintenance costs.
 



High Quality Compact Short Hydraulic Cylinder

Customer build 
is the first principle for Betten Hydraulic


We can design piston hydraulic cylinder for what you want if you can provide us the following technical parameters: 

1. Bore Diameter; 

2. Piston Diameter; 

3. Stroke; 

4. 
Working pressure; 

5. Installation Distanc


Technical Data 

 
Series name  CX Compact Hydraulic Cylinder(Double Acting) 
Nominal pressure  16MPa 
Equipment type  Standard: SA, FA, FB  Foot type: LD 
Inner diameter 
Φ32, φ40, φ50, φ63, φ80, φ100,  
Φ125, φ140, φ150, φ160 
Φ32, φ40, φ50, φ63 
Maximum allowable pressure  16MPa 
Test resistance pressure  21MPa 
Minimum operating pressure  Below 0.64MPa 
Rod tip screw  JIS 6H/6g 
Usable temperature range  Standard specifications:  
Φ32~φ125: -10ºC~+120ºC (H-NBR) 
Φ140~φ160: -10ºC~+80ºC (NBR) 
LD: -10ºC~+120ºC (H-NBR) 
Applicable hydraulic oils  General mineral hydraulic oils (If using other hydraulic oils, then please specify as such elsewhere) 



Main Features


1. Seal kits: From USA, durable and hard-wearing to ensure the small hydraulic cylinder a long service life.

2. Heat treatment: Quenching&Tempering which makes the piston rod super high hardness.

3.
 Cleaning: Ultrasonic cleaning.

4. 
Cutting: High precision provided by automatic roller cutting machine.

5. 
Testing: Ultrasonic detector, spectrograph, CMM, metallography, chrome thickness tester.

6. 
Advantage: Simple structure & reliable work, easy maintenance & diverse connecting ways of small hydraulic cylinder.

7.
 Plan: Different manufacturing plans for different customers.

8. 
MOQ: 10 PCS of small hydraulic cylinders

9.
 Lead time: 10~30 days depends on the small hydraulic cylinder quantity & whether customized.

10. 
Warranty: Change a new small hydraulic cylinder and we pay for the air freight in 2 years warranty time.

High Quality Compact Short Hydraulic Cylinder



Mounting Types 

High Quality Compact Short Hydraulic Cylinder

Packaging & Delivery


Delivery time depends on the destination and other factors, it may up to 7 work days. 
In order to ensure you receive you order tax free upon import, we will declare it as a "Sample"with a lower value. This lower price does not reflect the total price you paid. 
After we ship the goods, we will email you the shipping information, as well as tracking number.  
WEIGHT  RECOMMENDED TRANSPORT MEANS  TRANSPORT TIME  COMMENTS 
<50kg  Express-UPS/DHL/FedEx 
Door to door service 
3-7 days  Fast 
Convenient 
Expensive 
50-150kg  By air  3-10 days  Fast;  
Economic;  
Consignee has to do customs clearance 
150>kg  By sea  10-50 days  Slow;  
Economic;  
It takes some time for customs declarance and clearance 
2X20' or 1X40'  By rail  20-35 days  Slow;  
Economic;  
It takes some time for customs declarance and clearance;  
Only full container load accepted ( MOQ: 2X20' or 1X40' )  



High Quality Compact Short Hydraulic Cylinder



Our Company

Betten Hydraulic-Built Cylinders to Fit Your Needs
As an experienced Hydraulic Cylinder Manufacturer, Betten Machinery is built to develop the overseas business of Boli Hydraulic & Pneumatic Technology Co., Ltd which is known as a professional manufacturer of Oil Cylinder, Pneumatic Cylinder, Hydraulic System and Related Spare Partsin East China. 

Our factory cover an area of over 5000 square meters and have around 100 stuff including a technical team with more than 20 engineers. Our workshop equipped with over 30 sets of manufacturing and testing machines including machining center, numerical control machine, argon welding machine, plasma cutter etc. Betten has gained the certification of ISO 9001: 2008 and certification of Product Quality Supervision and Inspection Center of Wuxi City. Meanwhile, Betten also got customers' satisfaction for reasonable price, timely delivery and good after-sale service. 

With the fast development in the past 20 years, we have gained much experience and technology in making various types of Tractor hydraulic cylinder with our expert team. Our products are widely used in equipment such as machine tool, metallurgical equipment, forging machine, kiln equipment, brick machine, plastic machine, car manufacturing machine, construction equipment for road and bridge, wielding machine, port facilities, test machine, fully auto line and we have gained a lot of world famous customer like XCMG, LIUGONG Machinery, Chalco, BOSCH, Haier, SAINT-GOBAIN, Shanghai Boiler, HTC etc. 

High Quality Compact Short Hydraulic Cylinder




Manufacturing Process

Each Betten Hydraulic RAM has suffered rigorous process and inspection to promise the good quality for our customer. 

1). Design Services

Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support. 

2). Product Services

Raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping


3). Samples Procedure

We could develop the sample according to your requirement and amend the sample constantly to meet your need. 


4). Research & Development

We usually research the new needs of the market and develop the new model when there is new cars in the market. 


5). Quality Control

Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949. 


6). Certification

Should your products require testing and certification to comply with international standards, we can arrange this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's Register or the testing company of your choice. 


Hydraulic Cylinder Spare Parts

Piston Rod, seal kits, spherical plain bearing, tubes/pipes, etc. 

High Quality Compact Short Hydraulic Cylinder
FAQ

1. Are you trading company or manufacture? 

We are a manufacture for Hydraulic Cylinders and shock absorber piston rod with more than 20 years' history. 

2. Would you accept the production for small batches? 

Of course, we would accept it. We also could provide the sample for you. 

3. Hydraulic cylinder internal leakage? 

There are 3 main reasons causing internal leakage: Overload, polishing is not well controlled, bad seal kits. As is known to all, vehicles in China are often overload, our products all designed to bear the overload power. We have numerical control machine to assure the Polish processing. 

4. Does your piston rod get ruptured easily? 

Hard chrome plating quenched and tempered 45# steel for piston rod to assure sufficient hardness and toughness. 

 

Contact

Pls for free cantact Ciel liang

Tel +8615906192739

  

If you want to konw more about us, pls check our official website:

http://www.betten-hydraulic.com/

METALLIZED LAMINATION FILMS-BOPP

Metallized Thermal Lamination Film is made by Metallized BOPP Film and EVA, it's metallized Bi-axially Oriented Polypropylene film with EVA coated. BOPP Thermal Laminated Film is used by extrusion coating process to combine the two layers. In the final film, one side has BOPP properties and the other side becomes heat sensitive surface used for dry laminator. Single side is corona treatment. The Metallised Thermal Lamination Film is widely used and plays an important part in packaging industries.

Metallized Thermal Lamination Film,Metallised Thermal Laminating Film,Metallized Thermal Laminating Film Roll,Metallized Thermal Lamination Film BOPP

GR (SHANDONG) NEW MATERIAL CO., LTD , https://www.grmaterial-film.com

Posted on