Hot Sales Glazed Tile Roll Forming Machine Framing Roll Former

Model NO.: step tile machine
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Controller: Siemens PLC
Thickness: 0.3-0.7mm
Yield Stress: 235-345 MPa
Max.Forming Speed: 15-18 M/Min
Total Motor Power: 11 Kw
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Model NO.: step tile machine
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Controller: Siemens PLC
Thickness: 0.3-0.7mm
Yield Stress: 235-345 MPa
Max.Forming Speed: 15-18 M/Min
Total Motor Power: 11 Kw
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Hot Sales Glazed Tile Roll Forming Machine Framing Roll Former
Standard Equipment of Machine
 
1) Manual Uncoiler 1set
2) Infeed Guide 1set
3) Roll Forming Station 1set
4) Post-cut Equipment 1set
5) Hydraulic Station 1pc
6) PLC Control Console 1pc
7) Product Support Table 2pcs
8) Spare Parts 1box

Components for the Machine:
The roll forming machine includes manual uncoiler unit, infeed guide, fixed position driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.
 
Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3-0.7mm.(perfect is 0.4mm-0.6mm)
Main motor power 5.5 kw.
Hydraulic station power 5.5kw.
Feeding width 1000mm.
Cover width 828mm
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 15-18 m/min
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage 380V,3 Phase,50HZ,Or As per customer's request.
Numbers of stands 17 stations
Type of cutting Roll-formed and length-set profile cutting.

3. Material of Main Equipment:
Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.


Process Sketch:
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table

Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements. Hot Sales Glazed Tile Roll Forming Machine Framing Roll Former
Standard Equipment of Machine
 
1) Manual Uncoiler 1set
2) Infeed Guide 1set
3) Roll Forming Station 1set
4) Post-cut Equipment 1set
5) Hydraulic Station 1pc
6) PLC Control Console 1pc
7) Product Support Table 2pcs
8) Spare Parts 1box

Components for the Machine:
The roll forming machine includes manual uncoiler unit, infeed guide, fixed position driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.
 
Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3-0.7mm.(perfect is 0.4mm-0.6mm)
Main motor power 5.5 kw.
Hydraulic station power 5.5kw.
Feeding width 1000mm.
Cover width 828mm
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 15-18 m/min
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage 380V,3 Phase,50HZ,Or As per customer's request.
Numbers of stands 17 stations
Type of cutting Roll-formed and length-set profile cutting.

3. Material of Main Equipment:
Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.


Process Sketch:
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table

Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Hydrophobic

Hydrophobic,Anti-Settling And Thickening,Free-Flow And Anti-Caking Additive,Fumed Silica Controls Rheology

Henan Minmetals East New Materials CO. LTD. , https://www.minmetals-easts.com

Posted on