How to treat the false liquid level with a magnetic flap level gauge

     Magnetic level gauges are widely used in liquid level measurement and control in the production process of power, petroleum, chemical, metallurgy, environmental protection, shipbuilding, construction, food and other industries. The product is developed based on buoyancy principle and magnetic coupling. When the liquid level in the tested container rises and falls, the magnetic float in the body tube of the liquid level gauge also rises and falls. The permanent magnet in the float is transferred to the magnetic flip by magnetic coupling. Column indicator, driving red and white columns flip 180 °, when the liquid level rises, the column turns from white to red, when the level drops, the column turns from red to white, the red and white junction of the indicator is inside the container The actual height of the liquid level to achieve a clear indication of the liquid level.
     How to treat the false liquid level phenomenon with the magnetic flap level gauge:
     1. It is important to determine that the liquid phase and gas phase are all open;
     2. Use a magnet to scan the entire surface along the exterior. You can understand that it will be repaired.
     3, if it is a safe liquid, first let the liquid phase go away;
     4. If the vapour pressure in the gas phase is high, close the gas cut and press the liquid in the pipe back to the tank. The top-mounted magnetic flap level gauge is suitable for measuring a variety of inconvenient side device level gauge containers, especially the level measurement in the underground tank. Widely used in petroleum, chemical, metallurgy, electric power, light industry and medicine and other occupations and parts.
     5, the external disturbance signal is too large, the circuit is a false signal, not the actual measurement signal;
     6. The wave guide wire inside the liquid level gauge is loose, such as looseness, and the seal is not well rusted into the water, resulting in signal distortion;
     7. The waveguide wire device is incorrect and the signal transmission is distorted;
     8, signal processing circuit problems.
     Huajiang Automation can provide you with professional magnetic flap level gauge selection suggestions and reliable magnetic flap level gauge products. Any questions can be caused, we will have professional technical personnel to help you answer, and hope to bring it to you. You help!