![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
First, the insufficient air intake of the sprinkler causes insufficient power.
1, air filter inlet is not smooth. Clean or replace the air filter.
2, throttle closed inactive. Clean the throttle.
Second, sprinkling car carburetor acceleration hole plugging caused insufficient power. Clean the carburetor.
Third, the sprinkler vehicle circuit voltage and current shortage caused by insufficient power.
1, the battery voltage is insufficient. Charge the supplementary voltage or replace the battery.
2. Insufficient power due to lack of current caused by broken electrical contacts. Replace the breaker.
3. Insufficient power due to insufficient current due to uneven contact of the distributor cover. Replace the distributor cap.
4. Insufficient power due to aging of the cylinder line. Replace the sub cylinder line.
5. The lack of motivation caused by spark plugs.
(1) Insufficient power due to short circuit of spark plug. Replace the spark plug.
(2) The spark plug is dirty or the ignition contact is deformed. Clean or adjust spark plug ignition contacts.
We are Pingyuan Best Machine Tools., Co., Ltd., the high-end cnc machine tools manufacturer and supplier from China. Our products line is over 100 models, mainly include: Tool Holder Claw clamps, Tool holder, Tool holder Locking device , Collet , Spanner , Pull Stud and Nuts , Etc. Collet Chuck also include many standards and models like: ISO series, BT30 series, BT40 series, HSK series, NBT series and CAT series, etc. Tool holder claw clamps inlcude ISO series, BT / NBT series, HSK series etc. Pull stud used for tool holders, it is the part to the holder. The Tool Holder Nuts mainly inculde ISO series, BT series, SK series, etc. For Tool Holder nuts have many types , for example as ISO-ER type Tool Holder Nut.
Iso-Er Tool Holder Nuts,Collet Clamping Er Nut,Tool Holder Er Collet Nuts,Cnc Er Nut For Toolholder
Pingyuan Best Machine Tools Co., Ltd. , https://www.jinancncroutertools.com