Nitril NBR Square Rings Washer Rings for Water Fitting

Nitril NBR Square Rings Washer Rings for Water Fitting

we have clients -Cummins,Emerson,Neway,Linde,etc,and our products are applied in automobile,chemical,electrical industry and electronics,hydraulics and pneumatics,machine builders,petrol and allied industry,power industry, incl nuclear,off shore,solar,oil and gas ,etc
 

1. Compound from world class suppliers, NBR, EPDM, VITON (FKM), HNBR, Silicone,etc material and PANTONE code available, hardness from 30 to 95 Shore A. Imported compound from 3M,DuPont, Bayer, Daikin and Dow Corning,etc.

2. Pressed by mold vulcanization, ID from 0.5mm to 1000mm and C/S from 0.5mm to 20mm by mold Vulcanization, ID from 3mm to 20mm and C/S from 500mm to 6000mm by Section Vulcanization.

3. AS, JIS, BS,DIN,Metric and customize size available.

4. In house tool making and free of tooling charge for standard rubber ring, the mold line can be 45° and 180°.

5. RoHs / Reach / NORSOKM 710 certificate.

6. Strict material traceability in ERP and barcode system.

7. Big stock, mini MOQ acceptable.




Choose Xlong, choose the relibale supplier !

Nitril NBR Square Rings Washer Rings for Water Fitting

we have clients -Cummins,Emerson,Neway,Linde,etc,and our products are applied in automobile,chemical,electrical industry and electronics,hydraulics and pneumatics,machine builders,petrol and allied industry,power industry, incl nuclear,off shore,solar,oil and gas ,etc
 

1. Compound from world class suppliers, NBR, EPDM, VITON (FKM), HNBR, Silicone,etc material and PANTONE code available, hardness from 30 to 95 Shore A. Imported compound from 3M,DuPont, Bayer, Daikin and Dow Corning,etc.

2. Pressed by mold vulcanization, ID from 0.5mm to 1000mm and C/S from 0.5mm to 20mm by mold Vulcanization, ID from 3mm to 20mm and C/S from 500mm to 6000mm by Section Vulcanization.

3. AS, JIS, BS,DIN,Metric and customize size available.

4. In house tool making and free of tooling charge for standard rubber ring, the mold line can be 45° and 180°.

5. RoHs / Reach / NORSOKM 710 certificate.

6. Strict material traceability in ERP and barcode system.

7. Big stock, mini MOQ acceptable.




Choose Xlong, choose the relibale supplier !

Stereo Light Curing Molding - Sla

STEREO LIGHT CURING MOLDING - SLA
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.

Sla,Sla 3D Printing Service,Sla Printing Service,Sla Rapid Prototyping

Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com