The Common Five Fault Indicators on the Dashboard

1. Water temperature alarm light:

Water temperature gauges are generally pointer-type on vehicles. The pointer is usually indicated at normal temperature in the red area, its temperature value is generally around 95 degrees Celsius, and some cars are higher. The indication of the water temperature gauge can tell us the current temperature condition of the vehicle and show whether the engine is now in the normal temperature working range, whether there is an abnormal situation such as high temperature. Because the car will cause serious engine damage if it is operated at high temperatures for a long time. This requires us to pay attention to the instructions of the water temperature table from time to time while driving. Especially in summer, the weather is relatively hot and it is easy to cause high engine temperatures; therefore, when driving in the summer, pay special attention to your car's water temperature gauge. Do not allow the water temperature indicator to indicate to the red alarm area. If the pointer indicates to the red alarm area of ​​the water temperature meter, drive the vehicle to the roadside in time, stop and check to see if the engine has a boiling pot. If it does, if the water tank is opened, it is forbidden to open the tank cover with bare hands to avoid scalding. Start the car and allow it to cool slowly; then wait for rescue or replenish the cooling water, then open it to a nearby maintenance station for inspection and repair, identify the cause of the high water temperature and promptly correct the problem.

2. Engine fault light:

If this warning lamp is lit or the gauge indication is too high, we must turn off the engine. Check whether the engine oil is missing first. After the vehicle is turned off, pull out the engine oil dipstick to see if the engine oil page is at the minimum and maximum level. between. If the oil level is normal, you need to find maintenance personnel to check to determine the cause of the light.

3. Brake warning light:

If the brake warning light is on when the normal driver's hand brake is released, it is necessary to promptly get off the vehicle and check the brake fluid level to see if the brake fluid is lacking; once the brake fluid is seriously missing, it is necessary to pay attention to finding out if there is a leak. Because the brake oil will not be short enough, but the brake fluid leakage will lead to brake failure must be particularly careful; after inspection, if there is no shortage, you need to open to the repair station to check the brake fluid level sensor or hand brake light switch is faulty phenomenon.

4. Abs warning light:

If the ABS lamp lights up during driving, it indicates that the ABS electronic control system has abnormality; in this case, the normal normal braking system will not cause problems, but the ABS will not work. As the owner, you do not have to be afraid when you encounter this situation. ABS is faulty, there is no brake, because they are not in a series relationship, ABS will only start when the wheel is about to lock up, the wheel will not start when not locked, but as long as the brake system is not faulty brake is still available), Just drive as normal; then go to the repair station as soon as possible.

5. Airbag warning light:

If the airbag self-test fails after the start of the vehicle, the safety warning light will light up; at this time, the airbag may not pop open in the event of an accident and will not achieve passive protection; but the vehicle can still continue at this time. Driving, do not have to worry too much as long as you can repair the station as soon as possible.