The construction of the new plant of China National Heavy Duty Truck Group Co., Ltd. is proceeding in an orderly way.


Since June 2011, the construction work of China National Heavy Duty Truck Haixi Company focused on the goal of assembling the new line '9.8' off-line timeline node, overcome the high temperature of the hot summer, strengthen safety responsibility measures, and coordinate the scheduling and construction teams for each bid section. The progress of the construction is in an orderly manner.

One is to complete the exterior wall surface decoration of the joint plant of the new factory, with 6,000 square meters of roofs installed and the steel structure entering the tailing work. The second is the 70% progress of the image completion of the foundation platform of the paint shop, and the completion of the construction of the exhaust platform. Complete the pre-embedded work of the steel structure anchor bolts and lift the steel column 70%. The third is the completion of the delivery warehouse roof. The fourth is to complete debugging the shed 1400 square meters. The fifth is to complete the secondary grouting layer and tank installation in the body welding shop. Sixth, the construction of the masonry ring beam of the outer ring of the light truck room is completed, and the steel wire roof installation and the color steel plate installation of the roof are completed. The assembly line production and assembly line is expected to achieve the first target of the entire vehicle offline on September 8, 2011.

PVC Edge Banding

The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.

PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com

Posted on