The government has re-manufactured from the New Deal to a greater extent

Recently, 11 departments including the National Development and Reform Commission, the Ministry of Science and Technology, and the Ministry of Industry and Information Technology jointly announced the "Opinions on Promoting the Development of Remanufacturing Industries" (hereinafter referred to as "opinions") to further expand the scope of remanufacturing of parts and components. The "Opinions" clearly stated that China will focus on the remanufacturing of parts such as automobile engines, transmissions, and generators, and expand the pilot range of auto parts remanufacturing to drive shafts, oil pumps, and water pumps. At the same time, it promotes the remanufacturing of products such as machine tools and the refurbishment of large and used tires. The Opinions emphasize the promotion of the healthy development of the remanufacturing industry from the aspects of strengthening macro instruction, deepening pilot demonstrations, strengthening key technology R&D demonstration and promotion, improving the policy mechanism for the development of remanufacturing industries, and strengthening publicity and training, and expanding the scale of remanufacturing industries. .

Appealing prospects for policy support

In an interview with reporters, many experts stated that due to the imperfect national laws, regulations, and standards, the public has misunderstandings about the remanufacturing of parts and components and believes that the quality of remanufactured products is not effectively guaranteed. This is also the promotion of remanufactured products. One of the difficulties. "Remanufacturing is not the same as simple maintenance. Remanufacturing a product is not the same as using second-hand goods," said Xu Binshi, an academician of the Chinese Academy of Engineering. At present, remanufacturing has been widely studied and applied in industrialized countries. China has also provided considerable policy support for remanufacturing. This is evident from the introduction of the Opinions.

According to authoritative data, by the end of 2009, China's auto parts remanufacturing pilot has formed a remanufacturing capacity of 230,000 sets (sets) of automobile engines, transmissions, steering gears, and motors, and is exploring the production of old parts for recycling and remanufacturing. , Remanufacturing products circulation system and regulatory measures have made positive progress. China has also made important breakthroughs in the field of remanufacturing basic theory and key technology R&D. The remanufacturing technologies such as automated nanoparticle composite brush plating developed and applied have reached the international advanced level. It is reported that remanufacturing can save 50% of the cost and can produce significant economic benefits. Compared with manufacturing new products, remanufacturing has good energy-saving and material-saving benefits, can achieve energy-saving 60%, saving materials 70%, hardly produce solid waste, and emissions of atmospheric pollutants are significantly reduced.

Good corporate benefits

On March 21, 2008, China's auto parts remanufacturing pilot work was formally initiated. The National Development and Reform Commission has identified 14 companies to carry out pilot work on auto parts remanufacturing. Among them are China FAW, Anhui Jianghuai, and Chery's three automobile production companies and 11 pilot remanufacturing enterprises including Jinan Fuqiang, Weichai, and Yuchai.

The state has also implemented strict product and market circulation supervision and management for these enterprises. The remanufactured products produced by these enterprises must not be used for the production of new vehicles. Their technical performance and safety quality should meet the requirements of the original product related standards and the warranty standards and responsibilities should be Meet the same requirements of the original product. Pilot companies and authorized companies are jointly responsible for the quality of remanufactured products, and assume corresponding warranty responsibilities and after-sales services.

Despite the strict conditions, for enterprises, the vast market that remanufacturing possesses will allow it to enjoy a huge profit margin. Li Feng, General Manager of Weichai Remanufacturing Company, introduced that the company started mass production in January 2009, and in 2009 it produced a total of 1,679 remanufactured engines and realized sales revenue of 30.97 million yuan. As of March 2010, a total of 2,896 remanufactured engines were produced. Now, production has increased month by month, and the entire market has shown a good situation in which demand exceeds supply. "On a market with scrapped engines, consumers can sell to Weichai at a price of 25% of the new machine. After remanufacturing, consumers can buy it back at 70% to 75% of the new machine," he said.

Jiang Zaixian, vice general manager of CNHTC Jinan Fuqiang Power Co., Ltd., said that in 2009, the company had saved 16.87 million kwh of energy, reduced carbon dioxide emissions by 397 tons, used 4650 tons of waste steel, 450 tons of aluminum, and 150 tons of copper. In 2010, the company will strive to achieve an annual production target of 20,000 remanufactured engines.

Paper And Pulp

Paper And Pulp,Paper Pulp,Wood Pulp Paper,Cotton Pulp Paper

JIZHOU ZHONGYI FRP CO., LTD. , https://www.jzzhongyifrp.com

Posted on