As of August 7, a total of 35 companies in the energy-saving lighting concept section released the first half of the performance forecast, 31 companies pre-history. The three companies that took the lead in releasing the 2014 mid-year report, Sanan Optoelectronics, Lehman Optoelectronics, Ankerui, and Aoyang Shunchang, also handed over bright and beautiful answers, with a year-on-year net profit growth rate of more than 20. Benefiting from the continuous promotion of energy-saving policies and the maturity of the industry, 2014 was regarded as the first year of the official launch of our national LED lights, and the green lighting industry continued to improve. LEDs, that is, light-emitting diodes, have many advantages such as high luminous efficiency, fast starting speed, no pollution, and long service life compared with conventional light sources. Supporting the development of the LED industry has long been established as a national-level strategy. The government has successively formulated a number of engineering projects such as the 863 Program, Green Lighting Project, Semiconductor Lighting Project, and Ten City Wanhao Semiconductor Lighting Application Demonstration. After years of development, the industry has gradually matured, forming a complete industrial chain of LED chip preparation, LED epitaxial wafer production, LED device packaging and LED product application. In the early stage, the domestic demand for LED lights was concentrated on hotel and commercial transformation, and policy support caused the competition in the industry to a certain extent. In 2013, the newly expanded chip manufacturing equipment in the upstream market was very limited, while the price of downstream products fell by nearly 20. Overall researcher Shi Lei said that controlling investment, price adjustment and industry consolidation have caused enterprises to suffer a certain degree of pain, but it is conducive to promotion. Long-term development of the industry. At present, the price of some products on the market has been reduced to about 5 yuan per watt, with civilian conditions. According to research by the Institute, the total output value of China's lighting industry in 2013 was 263.8 billion yuan, of which the domestic market sales were slightly lower than the export value. According to China's 2012 roadmap for the phase-out of incandescent lamps, it is planned to ban the import and sale of ordinary lighting incandescent lamps of 15 watts and above on October 1, 2016. The market expansion potential brought by the stock market replacement is amazing. . Dou Linping, secretary-general of the China Lighting Society, predicts that in the next three to five years, the industry's output value is expected to exceed one trillion yuan. Judging from the 2014 semi-annual report, the peak season is first transmitted to the upstream chip manufacturing and downstream sales leaders. Taking the LED chip manufacturing company Sanan Optoelectronics as an example, the revenue in the first half of the year was 2.177 billion yuan, a year-on-year increase of 30.03. The sales revenue of LED-related products was about 2.028 billion yuan, up 40.68 year-on-year. At the same time, the company's mass production brought cost. The continuous decline has led to an accelerated increase in the gross profit margin of the chip business, reaching around 39. In the future, the company intends to continue to expand production equipment, accelerate market mergers and acquisitions, and scale benefits will be further highlighted. Ping An Securities [microblogging] electronics industry analyst Liu Yifeng said. Of course, some companies may go out early and it is difficult to enjoy this bonus. Dou Linping believes that in the industrial chain of LED lights, the mid-stream packaging enterprises belong to the processing of incoming materials, and the entry threshold is relatively low. At present, nearly 2,000 enterprises have overcapacity, and may be shuffled in advance.
CNC Machining Turning
CNC machining/lathe machining turning is the workpiece is fixed on the lathe, using high speed rotating machine drives the workpiece, the turning. tool on the workpiece so the product shape is round. The maximum of our machines can clip the weight of 200Kg, maximum diameter of 450mm, length of 750mm. high speed 3000RPM. processing materials are commonly used in steel, copper, aluminum, stainless steel POM, PS, PMMA, and other metal and plastic. The CNC machining turning precision of 0.01mm. concentric 0.01. we have specialized equipment to test products, these instruments include: TESA Grohe, micrometer, projector, calipers. Product surface treatment has anode, electroplating, sand blasting, passivation, surface drawing, spraying, laser carving, such as LOGO, etc..CNC machining Turning application in a variety of industries, including: cars, ships, communications, medical equipment, industrial automation equipment.
Cnc Machining Turning,Anodized Aluminum Cnc Machining Turning,Brass Cnc Machining Turning,CNC Machining Part
Hong Kong RYH CO., LTD , https://www.szcncmachining.com
![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)