Turbine Flow Meter with G1 G3/4 G1.5 Connection

  • Model NO.: FM-TE03
  • Main Application: Water, Fuel Oil, Nature Gas
  • Sensor: Tube/Flange
  • Type: Electromagnetic Flow Meter
  • Certification: RoHS
  • Operating Pressure: 10bar
  • Trademark: BINGO
  • Specification: RoHS
  • HS Code: 9026100000
  • Accuracy: ≤±0.1%
  • Size: G3/4′′ Female,G1′′female,G1.5′′female
  • Application: Industrial Production
  • Measuring Media: Liquid
  • Material: Al
  • Connection Size: G3/4′′ Female,G1′′female,G1.5′′female
  • Transport Package: Carton
  • Origin: China
FM-TE03 Flowmeter
FM-PE series flowmeter has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durablity,it is widely used in the petroleum,chemiacal,food industry,etc.Various displays to meet different requirments,it can indicate amount,volume,unit price,and so on.

Product Show
Turbine Flow Meter with G1 G3/4 G1.5 Connection
Turbine Flow Meter with G1 G3/4 G1.5 Connection

 Specification
Model FM-TE03
Application peroleum,chemical industry,medicine,transporation,food industry and business
Matrerial AL
Connection size G3/4'' female,G1''female,G1.5''female
Flow rate range 7.6-75.7L/min,18.9-190L/min,38.0-380L/min
Accuracy ±1.0%F.S.
Repeatablity ±3.0%F.S.
Operating pressure 10bar

About US
Turbine Flow Meter with G1 G3/4 G1.5 Connection

Cross Flow Cooling Tower

Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.


The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.


A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.


The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.

Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjm.com

Posted on