Xb0152 Micro Computer Belt Cutting Machine

• Model NO.: XB0152
• Power Supply: Electric
• Shoe Machinery: Micro Computer Beltcutting M/C
• with Advanced Control Device: Micro-Computer Numerial Controlling
• Cutting Width: 1-100mm
• Trademark: SOGU
• Specification: CE
• HS Code: 33039609

• Condition: New
• Function: Making Vamp
• Fuction: Colorful Belt,Nylon Belt etc.,for Sizing Cutting U
• Cutting Length: 0.1~9999.9mm
• N.W./G.W.: 34kgs/50kgs
• Transport Package: Wooden Case
• Origin: Zhejiang, Wenzhou

XB0152 MICRO COMPUTER BELT CUTTING MACHINE 
 
The machine is suitable for colorful belt,nylon belt etc.,for sizing cutting use.
  
1.The m/c is adopted micro-computer numerial controlling device to set the belt cutting length.

2.especially the cutting knife is equipped with heating device which can be heated &bonded the cutting mouth of braided belt,no burr,
 
3.time & laboursaving, low waste rate.

Matters needing attention 
1) moving workbench or spindle, according to the distance and artifacts, correctly selected movement speed, beware of collision when moving too fast.
2) when programming according to the actual situation to determine the correct processing technology and processing route, prevent due to insufficient processing position or on intensity artifacts caused by insufficient scrap or cut off the drop in advance.
Must be confirmed before 3) wire cutting program and the amount of compensation is correct.
4) check whether the wire electrode tension is enough. When cutting taper tension should be down to the usual half.
5) check the wire electrode of proper feeding speed.
6) according to the actual situation of work piece choose open or close the machining, on the premise of avoiding interference as far as possible to shorten the distance between nozzle and workpiece. The process, the distance between nozzle and workpiece generally take 0.05 ~ 0.1 mm.
7) check the jet choose whether reasonable, with high-pressure jet when rough machining, finish machining with low pressure jet.
8) slice observation should be paid attention to when processing stability, found that bad when adjust.
9) during processing, often should inspect the cutting condition monitoring, found the problem immediately.
 
 
 


 

Lowbed Semi Trailer

Lowbed Semi Trailer,Lowbed Semi Trailer For Sale,Low Bed Tractor Trailer,Semi Low Bed Trailer For Sale

SHANGQIU CITY TONGDA SPECIAL VEHICLE MANUFACTURING COMPANY LIMITED , https://www.sqtdgc.com