China-New-Refrigeration-Type-Compressed-Air-Dryer

QLD Refrigeration type compressed air dryer
 
Refrigeration type compressed air dryer is based on frozen dehumidification principle, could do the heat exchange of wet and heat compressed air through evaporator, making gas moisture to condense into liquid water, then released by gas-luquid separator.



 
Technical characteristics
 
- Equipped with international famous brand compressor, stable running, low noise, less energy consumption, safe and reliable
- This equipment using DANFOSS brand from Denmark as main refrigeration fittings.
- In order to avoid the secondary pollution of compressed air, in the process of production, all parts if touch the flowing air all processed by spray treatment.
- Unique gas-liquid separation design, blowdown more thoroughly
- Compact construction, without foundation installation
- Advanced programmable control, digital display function
- Electronic drainage, not easy jam, low energy consumption
- Equipped with RS485/RS232 combined transport interface, remote control, centralized monitoring and joint control with air compressor
- A variety of fault alarm and processing functions
- Normal type or computer type is chosen by the user

Technical indicators


1.Refrigerant compressor
2.Hot gas bypass valve
3.Water adjustment valve
4.Water filter
5.Water cooled condenser
6.Dry filter
7.Thermal expansion valve
8.Gas-liquid separator
9.Evaporator
10.Precooler
11.Steam separator
12.Electronic drain valve
13.Air-cooled condenser

Technical indicators

A:The air-filled type dryer
Air processing:1-500Nm³/min
Pressure of work:0.6-1.0MPa(could provide 1.0-3.0MPa if customer want)
The rated air inlet temperature:normal temperature type:≤45ºC(Min 5ºC)
                                   high temperature type:≤85ºC(Min 5ºC)
Cooling way:Air cooling
Finished product gas dew point:≤23ºC(Atmospheric dew point)
In and out of the air step-down:≤0.02MPa
Installation:No basic indoor installation
Environment temperature: ≤42ºC(Min 0ºC)
 
B:The water-cooling type dryer
Air processing:1-500Nm³/min
Pressure of work:0.6-1.0MPa(could provide 1.0-3.0MPa if customer want)
The rated air inlet temperature:normal temperature type:≤45ºC(Min 5ºC)
                                   high temperature type:≤85ºC(Min 5ºC)
Cooling way:Water cooling
Finished product gas dew point:≤23ºC(Atmospheric dew point)
In and out of the air step-down:≤0.02MPa
Installation:No basic indoor installation
Environment temperature: ≤42ºC(Min 0ºC)



 

Fully Automatic Hot Dip Galvanizing Line

Fully Automatic Hot Dip Galvanizing Line,Hot Dip Galvanizing Process,Intellegent Hot Dip Galvanizing Process,One-Stop Shop For Hot-Dip Galvanizer

Xinbai Plating(jiangsu) Intelligent Technology Co.,Ltd , https://www.hotgalvanizing.com