![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
2. Before the work, the welder must wear a variety of labor insurance products to prevent burns, injuries, and electric shock.
3. Before welding, check whether there are flammable or explosive materials around the working site, and whether the electrical insulation of the electrical system is good, etc., to prevent electric shock, fire, explosion and other accidents.
4. Conductive articles are not allowed on the welding machine. When the welding machine is turned on, it is necessary to push the foot quickly. After the operation is normal, the machine can be operated. When leaving the site, the welding machine should be turned off.
5, welding in the container, there must be insulation pads and low-voltage lighting, blast or ventilation facilities, and some people need to be monitored outside.
6. It is strictly forbidden to weld the closed container with pressure and flammable gas and flammable liquid. If necessary, there should be an air outlet and the container should be cleaned before operation.
7, ascend welding, must be stable before operation, high-altitude operations should comply with the relevant safety procedures for high-altitude operations.
8. When moving the wire, it is necessary to prevent the cutting and the damage. When the wire passes through the channel, the protective material should be added on the line. When the welding machine moves, the power is cut off first.
9. When working near inflammable and explosive materials, you should contact the relevant personnel and take relevant measures. After the work is over, check the site to prevent fires and explosions.
10. The arc welding electric welding transformer must have a casing, the primary joint must be closed, the ground wire should be in good contact with the work, and it can be operated only after being clamped and fixed by appropriate methods.
11. After the work is over, the water, electricity and gas valves or switches should be closed, the cable and related pipe should be well-discended, the site should be cleaned, the fire extinguishing should be extinguished, and the welding machine and related tools should be put back into the proper position.
Size: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/4", 1-1/2"
Usage: Lifting, connecting, Wire rope fittings, Chain fittings, Marine hardware fittings
Swivel standards: G-401 chain swivel, G-402 regular swivel, G-403 jaw end swivel
Feature: Swivels are used to connect various types of chain, wire rope, or fibrous ropes. These swivels can relieve stress and force caused by twisting and knotting while being pulled taut.
Stainless Steel Swivel,Stainless Steel Eye Swivel Ring,Stainless Steel Swivel Chain,Double Eye Link Chain Swivel
Jiangsu Juke Metal Products Co.,Ltd. , https://www.jsjukemetal.com