Model NO.: TIG-200P AC/DC
Guarantee: 1 Year
Application: Welding
Trademark: GUBANG
Transport Package: Carton
Specification: (L*W*H)(mm): 500*335*315 Weight(Kg): 20
Origin: Shenzhen China
HS Code: 8515390000
Model NO.: TIG-200P AC/DC
Guarantee: 1 Year
Application: Welding
Trademark: GUBANG
Transport Package: Carton
Specification: (L*W*H)(mm): 500*335*315 Weight(Kg): 20
Origin: Shenzhen China
HS Code: 8515390000
 Performance and Features:             Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary. Â
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.Â
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.Â
- Has connector to foot control, convenient for workers's operation.Â
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating. Â
- High duty cycle, may work continuously with high current. Â
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification:
Â
Model Item      |
TIG 200P AC/DC |
Voltage(V) | AC220V ±15% |
Frequency(Hz) | 50-60 |
Input Power(KVA) | 5.8 |
No-load Voltage(V) | 56 |
Current Range(A) | 10-200 |
Rated Duty Cycle | 60% |
Applied Welding Rod(mm) | ¢1.6-4.0 |
Pre-flow time(S) | 2 |
Post-flow time(S) | 0-10 |
Down slope(S) | 0-10 |
AC Balance(%) | 20-80 |
AC Frequency(Hz) | 60 |
Pulse Frequency(Hz) | 0.5-300 |
Power Factor | 0.73 |
Efficiency(%) | 85 |
Insulation Grade | F |
Housing Protection Grade | IP21S |
Weight(Kg) | 20 |
(L*W*H)(mm) | 500*335*315 |
Carton CBM(m3) | 0.115 |
Specification | |
 Capacitor | 470uF/400V*4 |
MOSFET | 23N50E*12 |
Output Rectifier | D92-02*12 |
    Accessories:
Â
- 1) 2.5 meter 25mm2 welding cable with 200A electrode holder
- 2) 2.5 meter 25mm2 earth cable with 300A earth clamp
- 3) 4m TIG torch WP-26A
Â
- Â
Â
Â
visit our website http://www.inverter-welding.com, you can get the full information and download catalog of full range of our products.
Â
B. Inverter Welder Technology Invovation:
Â
1. Inverter welder machine: Small volume, light-weight, energy saving,
2. Portability: for high mobility environment, aerial, field work and interior finishing etc,
3. Digital MCU control: stable metal transfer, fine welding apprearance,
4. Peak value current mode control: reliable power device,
5. Optimized engine design: high adaptability to voltage between AC160V-250V,
6. Single board design: high integration, scientific duct design for thermal diffusion,
7. Easy Operation: single knob adjustment,
8. Cost effective: perfect protective function.
Â
Â
C. Product Mode and Specification:
.----Why choose usÂ
a. We have strict test and QC system to guarantee the high quality.Â
b. Our price is reasonable and Competitive.Â
c. We have 3Â production lines to guarantee the delivery time.Â
d. RÂ & DÂ team provide the newest products to customers and customized products available.Â
E. Q&A:
a. ------ Can we get the sample?
--------Of course.
Â
b. --------What is the MOQ of welding machine?
--------Generally 30 pcs for 250A. 100PCS for 100A, 30pcs for Cutter.
Â
c. --------What is generally your productivity?
--------Generally speaking, 40,000 pcs per month, 8,000 pcs per month for relatively bigger capacity machine.
Â
d. --------Can you make products obey my request?
---------Yes, we have a development team who has great experience in developing new products.
OEM/ODM are highly welcomed.
Â
F. Our ServiceÂ
We assure you of our best services at all times.Â
Customized design is available.Â
Your business relationship with us will be confidential to any third party.Â
If you have any questions about Electric Insulated pliers please feel free to contact me.
Â
Â
Â
Â
SHENZHEN GUBANG TECHNOLOGY CO.,LTDÂ is the high-tech enterprise with R&D, manufacture,sales integrated. "To be the most cost-effective national brand in welding area." "concentrated in welding,diligent in service" as the core value of GUBANG. "Innovative, positive and pragmatic" are management principles of GUBANG ;GUBANG inputs and reforms the new technology constantly, thereby enhance the production efficiency, and professional EMS position. To be the customer's best partner,GUABNG persists for the spirit that do anything well from the first time, to provide high quality welding products and high quality technical service for China and global manufacturing through total quality management and each process of continuous improvement. GUBANG has been perfecting the after-sale service, and implementing the guarantee in China, to provide our customers with timing, comprehensive, convenient and fast technical support and technical guidance. GUBANG products have been exported to Europe, America, Africa, Oceania, Middle East and Southeast Asia, including more than 80 counties and regions.GUBANG is always committed to promote industrial automation, intelligent, energy saving and environmental protection, and continuously to promote high-tech products to meet the needs of low-carbon economy, let's hand in hand to create the great welding, keep pace with times to contribute to the development of automation of industrial equipment.
Â
Our Services
Â
1.  Your inquiry related to our product & price will be replied within 24 hours
2.  Well-trained & experienced staff are to answer all your inquiries in English
3.  Working time: 8:30am ~18:00pm, Monday to Saturday.Â
4.  Customized solution & perfect after-sale service
5.  For large order, engineer can be sent to your country for on-site maintenance instructions.
Â
Our advantage:
1) Competitive price          2) Good quality Â
3) Timely delivery            4) New model launch yearly  Â
5) Own manufacturing        6) own quality control
Â
Â
If you interest, Pls. feel free to contact us NOW!!!
Â
SHENZHEN GUBANG TECHNOLOGY CO.,LTD.
Tel:Â Â +86(755)27232113
 Â
Website:Â http://www.inverter-welding.com/www.gubang.cc
Address: Jimei Industrial Area, Furong Road, Songgang, Bao'an, Shenzhen, 518105, China
Â
Â
- Â
Â
- Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary. Â
- Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.Â
- Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.Â
- Has connector to foot control, convenient for workers's operation.Â
- Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating. Â
- High duty cycle, may work continuously with high current. Â
- Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.
Parameter/Specification:
Â
Model Item      |
TIG 200P AC/DC |
Voltage(V) | AC220V ±15% |
Frequency(Hz) | 50-60 |
Input Power(KVA) | 5.8 |
No-load Voltage(V) | 56 |
Current Range(A) | 10-200 |
Rated Duty Cycle | 60% |
Applied Welding Rod(mm) | ¢1.6-4.0 |
Pre-flow time(S) | 2 |
Post-flow time(S) | 0-10 |
Down slope(S) | 0-10 |
AC Balance(%) | 20-80 |
AC Frequency(Hz) | 60 |
Pulse Frequency(Hz) | 0.5-300 |
Power Factor | 0.73 |
Efficiency(%) | 85 |
Insulation Grade | F |
Housing Protection Grade | IP21S |
Weight(Kg) | 20 |
(L*W*H)(mm) | 500*335*315 |
Carton CBM(m3) | 0.115 |
Specification | |
 Capacitor | 470uF/400V*4 |
MOSFET | 23N50E*12 |
Output Rectifier | D92-02*12 |
    Accessories:
Â
- 1) 2.5 meter 25mm2 welding cable with 200A electrode holder
- 2) 2.5 meter 25mm2 earth cable with 300A earth clamp
- 3) 4m TIG torch WP-26A
Â
- Â
Â
Â
visit our website http://www.inverter-welding.com, you can get the full information and download catalog of full range of our products.
Â
B. Inverter Welder Technology Invovation:
Â
1. Inverter welder machine: Small volume, light-weight, energy saving,
2. Portability: for high mobility environment, aerial, field work and interior finishing etc,
3. Digital MCU control: stable metal transfer, fine welding apprearance,
4. Peak value current mode control: reliable power device,
5. Optimized engine design: high adaptability to voltage between AC160V-250V,
6. Single board design: high integration, scientific duct design for thermal diffusion,
7. Easy Operation: single knob adjustment,
8. Cost effective: perfect protective function.
Â
Â
C. Product Mode and Specification:
.----Why choose usÂ
a. We have strict test and QC system to guarantee the high quality.Â
b. Our price is reasonable and Competitive.Â
c. We have 3Â production lines to guarantee the delivery time.Â
d. RÂ & DÂ team provide the newest products to customers and customized products available.Â
E. Q&A:
a. ------ Can we get the sample?
--------Of course.
Â
b. --------What is the MOQ of welding machine?
--------Generally 30 pcs for 250A. 100PCS for 100A, 30pcs for Cutter.
Â
c. --------What is generally your productivity?
--------Generally speaking, 40,000 pcs per month, 8,000 pcs per month for relatively bigger capacity machine.
Â
d. --------Can you make products obey my request?
---------Yes, we have a development team who has great experience in developing new products.
OEM/ODM are highly welcomed.
Â
F. Our ServiceÂ
We assure you of our best services at all times.Â
Customized design is available.Â
Your business relationship with us will be confidential to any third party.Â
If you have any questions about Electric Insulated pliers please feel free to contact me.
Â
Â
Â
Â
SHENZHEN GUBANG TECHNOLOGY CO.,LTDÂ is the high-tech enterprise with R&D, manufacture,sales integrated. "To be the most cost-effective national brand in welding area." "concentrated in welding,diligent in service" as the core value of GUBANG. "Innovative, positive and pragmatic" are management principles of GUBANG ;GUBANG inputs and reforms the new technology constantly, thereby enhance the production efficiency, and professional EMS position. To be the customer's best partner,GUABNG persists for the spirit that do anything well from the first time, to provide high quality welding products and high quality technical service for China and global manufacturing through total quality management and each process of continuous improvement. GUBANG has been perfecting the after-sale service, and implementing the guarantee in China, to provide our customers with timing, comprehensive, convenient and fast technical support and technical guidance. GUBANG products have been exported to Europe, America, Africa, Oceania, Middle East and Southeast Asia, including more than 80 counties and regions.GUBANG is always committed to promote industrial automation, intelligent, energy saving and environmental protection, and continuously to promote high-tech products to meet the needs of low-carbon economy, let's hand in hand to create the great welding, keep pace with times to contribute to the development of automation of industrial equipment.
Â
Our Services
Â
1.  Your inquiry related to our product & price will be replied within 24 hours
2.  Well-trained & experienced staff are to answer all your inquiries in English
3.  Working time: 8:30am ~18:00pm, Monday to Saturday.Â
4.  Customized solution & perfect after-sale service
5.  For large order, engineer can be sent to your country for on-site maintenance instructions.
Â
Our advantage:
1) Competitive price          2) Good quality Â
3) Timely delivery            4) New model launch yearly  Â
5) Own manufacturing        6) own quality control
Â
Â
If you interest, Pls. feel free to contact us NOW!!!
Â
SHENZHEN GUBANG TECHNOLOGY CO.,LTD.
Tel:Â Â +86(755)27232113
 Â
Website:Â http://www.inverter-welding.com/www.gubang.cc
Address: Jimei Industrial Area, Furong Road, Songgang, Bao'an, Shenzhen, 518105, China
Â
Â
- Â
Custom Notebook,Custom Design Composition Notebooks,Custom Design Journal Notebooks,Custom Design Notebooks
Gold Union Printing , https://www.goldunionprinting.com