Exclusive Secret | With the Sany hydraulic hydraulic roller has such a high preservation rate?

In 2011, due to engineering needs, Sichuan’s Chen boss bought three Sany road rollers at one time. The picture shows the peace of mind and convenient after-sales service. In 2019, he updated and replaced the old roller that he bought before. He comprehensively compared the 10 rollers in his hand in the past eight years. Chen Boss rated the Sany roller with the lowest failure rate and the highest value retention rate. So why does Sany hydraulic roller have such a high rate of preservation? Now come along with Xiaobian to find out.

Twenty-two years focused on full hydraulics

Since entering the road roller market in 1998, Sany has been focusing on full hydraulic pressure. It has more than 20 years of research and development and technology precipitation. It has launched a variety of network red explosion equipment, especially the C8 series road roller has occupied the same hydraulic pressure of the same tonnage. Steel drum roller tops the list.

Full hydraulic crown three-one C8 series roller

Trinity has been fully hydraulic in the industry when it first emerged. From the initial incomprehension to today's leading industry trend, it is hard to say during this period, and this year's newly upgraded Sany full hydraulic SSRAC-8H series road roller is not only in the old The customers are highly praised, and they are eye-catching at this year's Beijing exhibition, causing many people inside the road circle to look around for enquiries.

Sany C8-H series road roller debuted in Beijing exhibition

The rising market share also means that its market recognition and popularity have increased. It has double guarantees of sales volume and Sany brand. It is certain that the market value of Sany Hydraulics will be in the forefront of the industry in a few years.

Low hydraulic maintenance costs, longer service life

The mechanical roller has large impact and fast component damage. The Sany hydraulic SSRAC-8H series roller has a gentle operation and a longer service life, and the hydraulic pressure does not require friction plates, and the loss is smaller. In terms of maintenance, the mechanical type requires spare friction plates, brake oil, hand brakes and other accessories, the failure rate is high, affecting work efficiency, Sany hydraulics does not have these concerns at all, and maintenance is extremely convenient. In terms of maintenance costs, it can save nearly 3,000 yuan per year, such as spare parts, working hours, and lost time.

Sany full hydraulic SSR220AC-8H road roller

Low maintenance costs mean that equipment costs are low. For equipment that is cheap and has no troubles and high maintenance costs, Sany Hydraulics obviously has more room for value.

National III standard equipment has high hydraulic construction efficiency

Recently, the state issued the "Action Plan for the Comprehensive Management of Air Pollution in the Autumn and Winter of 2019-2020 in Beijing, Tianjin and Hebei and the Surrounding Areas", and will carry out a six-month special rectification work for environmental protection. It can be seen that the requirements of the country for environmental protection standards are getting higher and higher, and high-emission equipment will be further accelerated.

Sany full hydraulic SSR220AC-8H road roller

The Sany full hydraulic SSRAC-8H series road roller is not only equipped with the upgraded Weichai 147kW engine, which meets the national three emission standards, and adopts a simple hydraulic transmission system. The large displacement vibration motor is equipped with a rat bag type lubrication structure and patented vibration bearing. The starting time is only 3 seconds, which can effectively solve the cumbersome operation and increase the construction efficiency by more than 20%. According to preliminary estimates, the work is 1,500 hours per year, fuel oil is 16L/h, 6 yuan/L, and the annual cost can be reduced by 1500X16X6X20%=28800 yuan.

Saying a thousand and ten thousand, making money is the last word. Mr. Chen said that when choosing equipment, in addition to considering the price, it is more about input-output ratio, equipment maintenance rate, etc., doing engineering, can not speculate, earn a hand Pull down, but also pay attention to sustainability. The choice of Sany full hydraulic roller is because the equipment preserves value, the manufacturer and agent service guarantee is in place, the equipment runs for a long time, and the business can last longer.

The Trinity Road Purchasing Festival is in full swing, with a maximum straight drop of 82,000!

The old irons who have the need to purchase the machine quickly scan the QR code line to place an order~ (This article is from Sany)