F-1300 and F-1600 Triplex Drilling Mud Pump for Drilling

F-1300 mud pump can be used to circulate the drilling fluids, clean the bottom of the hole, carry the drill cuttings out of the hole, cool, clean and lubricate the drill bit, and support the well in drilling operation in the oil and gas field, it is a kind of horizontal medium-speed triplex single acting piston pump. It mainly suits to Rig 32-45 with drilling depth 3200m to 4500m.
Technical Data
-Mud Pump Type:   Triplex Single Acting
-Rated Power:      1300 HP/969 KW
-Rated Stroke:      120 SPM
-Liner Stroke:      12 '' /305 mm
-Gear Ratio:        4.206:1
-Suction Inlet:      12'' /305 mm
-Discharge Inlet:    5 1/8 in Flange 5000 psi
-Gear Type:        Herringbone
-Lubrication;       Forced&Splash
-Valve Pot:          API-7#
-Overall Size:     
    Length:       4617 mm   
    Width:        3260 mm
Height:       2600 mm
-Weight(approx.):   24572 kg


Note:
-Max. Pressure:      5075 PSI/35 Mpa
-Max. Flow:         737GPM/46.54 L/S with 180mm Liner
-Max. Stroke Length:  12'' /305 mm
-Max. Liner Size:      7'' /180 mm
-Liner Size:
   Inch:            7", 6 3/4", 6 1/4", 6", 5 1/2", 5"
   mm:            180mm, 170mm, 160mm, 150mm, 140mm, 130mm

F-1600 mud pump can be used to circulate the drilling fluids, clean the bottom of the hole, carry the drill cuttings out of the hole, cool, clean and lubricate the drill bit, and support the well in drilling operation in the oil and gas field, it is a kind of horizontal medium-speed triplex single acting piston pump. It mainly suits to Rig 45-80 with drilling depth 4500m to 8000m.

 Technical Data
-Mud Pump Type:   Triplex Single Acting
-Rated Power:      1600 HP/1193 KW
-Rated Stroke:      120 SPM
-Liner Stroke:      12 in/305 mm
-Gear Ratio:        4.206:1
-Suction Inlet:      12 in/305 mm
-Discharge Inlet:    5 1/8 in Flange 5000 psi
-Gear Type:        Herringbone
-Lubrication;       Forced&Splash
-Valve Pot:          API-7#
-Overall Size:     
    Length:       4615 mm   
    Width:        3276 mm
Height:       2688 mm
-Weight(approx.):   24791 kg

Note:
-Max. Pressure:      5075 PSI/35 Mpa
-Max. Flow:         737GPM/46.54 L/S with 180mm Liner
-Max. Stroke Length:  12 in/305 mm
-Max. Liner Size:      7 in/180 mm
-Liner Size:
   Inch:            7", 6 3/4", 6 1/2", 6 1/4", 6", 5 1/2", 5",4 1/2"
   mm:            180mm, 170mm, 160mm, 150mm, 140mm, 130mm
  Note:1. Based on 100% volumetric efficiency and 90% mechanical efficiency.
     2. Recommend stokes and input powers are under continuous operation.













 

UCPA Pillow Block Bearing

Guanxian YX Bearing Co., Ltd. , http://www.sdbearings.com