Four advantages of solar energy using insect traps

For a long time, the widespread use of pesticides has affected the quality of agricultural products. Not only agricultural products have been contaminated, but also beneficial microorganisms in the soil have been killed, weakening the natural resilience of the soil. Long-term accumulation will eventually endanger people's health. . At the end of the last century, people studied the use of physical methods for pest control, that is, using the characteristics of insects such as light, color, taste, and sex to trap and kill pests.

Among them, the technique of trapping and killing insects using insect phototaxis attracts earliest and the technology is the most mature, usually setting the wavelength and intensity favored by the insects, attracting the insects to the vicinity of the lamp, and dazzling the blinking effect due to the occurrence of compound eye effects. The pests are killed by high pressure, frequent shocks, drugs, flooding, etc. In general, the effect of high voltage electric shock is best. When laying insect traps in the field, the transmission lines need to be laid and consume a lot of electric energy, which increases the cost of agricultural production. Solar energy is an inexhaustible source of clean energy that does not require transportation and does not pollute the environment. Solar trap lamps use solar panels to convert sunlight directly into electricity and provide energy to the equipment.

Compared to traditional pesticides, the advantages of trap lights are obvious:

1) Green is pollution-free, and beneficial insects can be protected through intelligent control;

2) Many types of insecticides can cut off the propagation chain, which can effectively reduce the field population density;

3) Reducing the use of chemical pesticides for 5 to 6 times a year will not only reduce the production cost, but also avoid the occurrence of pesticide resistance caused by the use of pesticides;

4) Wide range of booby traps, long service life, and unlimited application areas.

Polyethylene Wax

Polyethylene wax (PE WAX), also known as polymer wax referred to as polyethylene wax. Because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance and has been widely used.
1. Used as excellent external lubricant in PVC profile, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque.
2. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functional masterbatch. It makes the products inorganic components and pigments dispersed better, and get more beautiful appearance .
3. Used as excellent external lubricant in PVC stabilizer , especially in Ca-Zn stabilizer. Additional use suitable inner lubricant, it will highly improve the overall effect of stabilizer and increase the cost-effective correspondingly.
4. Used in hot melt adhesives can better adjust the products viscosity and hardness, improve its fluidity. .
5. Used in paint, coating and the road marking paint,its main performance is heat resistance, deforming ,leveling, anti-setting and dispersion. It can increase the products surface hardness, wear-resistance and anti-smearing properties.
6. Used as modifier in paraffin wax, and improve the paraffin`s melting point , crystallinity ,etc.
7. Used as releasing agent and protective agent in rubber .

Pe Wax Powder,Olyethylene Wax Powder,Pe Wax For Plastic Additives,Pe Wax High Density

Hengshui Yimei New Material Technology Co.,Ltd , https://www.yimeipewax.com