2, clear signals, familiar with the process flow between the upper and lower posts.
3. Before starting the air, carefully check whether the power cable is scratched or damaged. If the button on the control box is damaged, whether the potentiometer on the inverter hits the zero position, it can be started after confirming normal.
4. During the operation of the impeller, the operator should straighten out the cable on the sliding line.
5. Start the main motor at the start, so that the impeller can rotate to start the travel motor. When stopping, stop the motor first and then stop the main motor.
6. After starting the machine, carefully observe whether the motor and reducer are abnormal. After confirming the normal, the frequency can be gradually increased.
7. Always check whether the operation and sound of each component are abnormal during operation. If abnormalities such as scratching the power cable and buttons on the control box are found, stop immediately and dispose of it.
8. When the coal feeder is walking to both sides, it should be prevented from colliding and slipping out. When adding the amount, it should be uniform, and it is forbidden to suddenly increase the amount.
Pigment Red,Red Ochre Pigment,Brilliant Red Pigment,Red Oxide Pigment
lilygroup Co.,Ltd , https://www.lilychemical.com