Safe use of self-igniting batteries for electric vehicles is critical
It is not uncommon for electric vehicles to spontaneously ignite in electric vehicles that are gradually spreading throughout urban and rural areas. Why are such dangerous accidents happening? Product quality is very important and the owner is also critical.
Since the electric vehicle power comes from the battery, the internal circuit of the electric vehicle is complicated and complicated. If it is used improperly and the maintenance is lacking, the internal circuit wires are prone to aging problems. In the process of using the electric vehicle, the circuit is short-circuited due to heat, causing the electric vehicle. Self-ignition.
How to avoid such a dangerous accident?
First of all, when purchasing an electric car, you should choose a brand with a good reputation. The quality is always the first. The quality of a good manufacturer's electric vehicle battery is relatively reliable. Be aware that many electric vehicle accidents stem from battery problems.
Secondly, during use, pay attention to charging the battery according to the brand name. The charging process of the electric vehicle is also prone to fire. If the power supply voltage, current is too large, or the charger does not match, the battery may explode.
At the same time, in the course of use, you should always pay attention to the maintenance of circuit lines to prevent the aging of the wires to cause accidents such as short circuit and spontaneous combustion.
Common sense of battery use: 1, should pay attention to product quality when purchasing, purchase qualified products produced by regular manufacturers; 2, read the nameplate before use, strictly follow the instructions of the nameplate, select matching or matching charger, at rated voltage, Safe charging under current; 3, try to avoid overcharging or insufficient charging. After the battery is fully charged, it can be used to extend the life of the battery and reduce the occurrence of unsafe accidents.
The STL water-jacketed gold concentrator is a kind of gravity separation equipment. It was developed by Changchun Gold Research Institute Co., Ltd. in 1985 and entered the market. At present, it has been used in many domestic and foreign companies. It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.
The main indicators of this series of equipment basically reach the level of similar international products (such as Nielsen gold selectors, etc.). Compared with similar equipment at home and abroad, this series of equipment has the advantages of high cost performance, easy operation, and low maintenance costs.
Gold Concentrator,Best Gold Concentrator,Gold Dust Separator Machine,Centrifugal Separator Gold
Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com