![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
This regulation stipulates the safe operation contents and requirements for the loading position.
This procedure is applicable to the job of loading and unloading in the wet smelting workshop.
2 content
1. Before going to work, you must wear protective gear such as helmets, overalls, protective shoes, protective gloves, and protective glasses.
2. The surface personnel should accurately command the crane work. When the crane is under load, it is forbidden to work or stay under it.
3. When flushing the bottom of the tank with electrolyte or adding electrolyte, pay attention to the safety of other personnel on site. Slowly open and close the valve to prevent the pressure from being too high and break the rubber pad to spray. At the same time, the sputum operation is strictly forbidden to prevent the electrolyte from splashing and injuring people; if the electrolyte splashes into the eyes, immediately wash the eyes with tap water and then go to the hospital for treatment.
4. According to the standardization, the power outage operation is performed. After the power failure of the instrument room is completed, it is necessary to go to the site to confirm the short circuit on the spot before informing the crane operator of the loading work.
5. When filming, you should first confirm that the starting piece has been hung on the hook and take care to avoid being cut by the edge of the starting piece.
6. According to the operation standard and process conditions, the electrolysis cell group is powered. Before sending power, make sure that the plates in the tank are installed and the liquid level is normal.
7. When working at the bottom of the tank, pay attention to the brackets, pipes, trenches and other items at the bottom of the tank to prevent the head from falling or falling into the pits and trenches.
8. The correct posture should be used when lifting the initial piece to avoid spraining the waist.
9. When walking on the groove surface, attention should be paid to it. Do not chase or jump, prevent falling in the groove or sprain the foot.
10. Strictly abide by the operating procedures for water, electricity, wind and steam shutdown operations.
Direct Brown dyes
NINGBO YUNCAI CHEMICAL CO.,LIMITED , https://www.win-chemical.com