Scale and technical effects highlight Jingke Electronics' revenue in 2016 of more than 600 million

On the evening of April 19, the New Third Board Guangdong Jingke Electronics Co., Ltd. released its 2016 annual report. The report shows that Jingke Electronics maintained its high growth rate in 2016, including operating income of 603,769,733.47 yuan and net profit of 31. , 533,768.30 yuan, an increase of 177.31% over the same period last year. Revenue of 604 million, net profit growth of 177.31% In 2016, a number of important indicators of Jingke Electronics maintained a rapid growth trend. Among them, operating income was 603,769,733.47 yuan, an increase of 95.11% over the same period of last year; net profit was 31,533,768.30 yuan, an increase of 177.31% over the same period of last year. The gross profit margin also increased from 14.40% in 2015 to 18.03%. Jingke Electronics said that during the reporting period, the company achieved operating income of 603,769,733.47 yuan, an increase of 95.11% over the same period of last year. The main factor was the large customers opened up in the second half of 2015. The order was stable and continued to grow this year. The company seized the opportunity to expand. The scale of LED packaging capacity has increased market expansion and effectively released production capacity, so this year has seen a substantial increase compared with the same period last year. The increase in operating income, the increase in gross profit margin, coupled with technological improvements and capacity expansion, have effectively reduced the production costs of the products, resulting in a rapid growth of Jingke Electronics' net profit in 2016. As of December 31, 2016, Jingke Electronics had total assets of RMB 816,454,408.82, an increase of 18.72% over the same period of last year; net assets per share attributable to listed company shareholders was 1.41, an increase of 19.88% from the end of the previous year. At the same time, the net cash flow from operating activities amounted to RMB 22,569,405.04. Scale, technical effect release, high-speed growth for two consecutive years In fact, in the past two years, Jingke Electronics' revenue has increased rapidly year by year, and the profit trend is obvious. According to public data, the operating income in 2015 and 2016 was 305,455,800 yuan and 603,671,700 yuan respectively; the net profit realized was 11.3712 million yuan and 31,513,800 yuan respectively; in 2015 and 2016, the company's The gross profit margin was 14.40% and 18.03%, respectively. (See the picture below) Jingke Electronics' performance in recent years (unit: 10,000 yuan) Jingke Electronics was established in August 2006, is a research and development, manufacturing and manufacturing of LED devices, module light sources, light engines and intelligent lighting products. The high-tech enterprises that sell are in the middle of the LED industry chain. In June 2016, Jingke Electronics officially listed the new three boards and became one of the few LED device manufacturers on the new three board. It is understood that since its establishment, Jingke Electronics has relied on independent research and development, and has mastered the international leading LED core technology, including high-power high-brightness flip-chip LED chip manufacturing technology, wafer-level white light high-power LED light source without gold wire package. Technology, ultra-high power LED module light source and white light packaging technology, high color gamut TV backlight technology and direct-type high-power backlight technology and other core technologies. By the end of 2016, Jingke Electronics had applied for 141 patents in the United States, China and other regions, including 73 authorized patents, including 25 invention patents. The patented layout covers key technologies, materials and processes for LED chips, packaging and optical components, especially in flip-chip LED chips and modules, gold-free packaged light source technology, wafer-level packaging technology, LED and IC integration technology, LED TV backlights, etc., have core patented technology and are applied to the company's products, ensuring that the company's products have proprietary intellectual property rights. At present, from the perspective of industry development, the LED industry has experienced fierce changes after the price increase, expansion, mergers and acquisitions and environmental impact in 2016. Jingke Electronics not only leads the industry in terms of technology, but also has significant advantages in sales channels. It is understood that Jingke Electronics has carried out production and operation in a planned and planned manner according to the business objectives set at the beginning of the year. On the basis of stabilizing existing TV backlighting and lighting customers, it continues to actively explore international major customers to meet the increasing orders of customers. The company has completed a large-scale expansion of production capacity. While expanding production capacity, the company actively explores potential, improves production efficiency, reduces procurement costs, and fully reflects the benefits of large-scale operation. With the maturity of LED technology and products, LED lighting is fully infiltrated, and demand continues to grow. From outdoor street lights, tunnel lights, garden lights and outdoor decorative lights, to indoor commercial lighting, office lighting, home lighting, and other special lighting, LED products are all in full use. In the next few years, the demand for LED products will continue to grow, and Jingke Electronics is ready to meet the ever-widening market space.

Semi-Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Tyre Pyrolysis Plant

Flowchat of Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm  Î¦2600*6600mm

Φ2200*6000mm  Î¦2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

  Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

 

Semi-continuous Waste Tyre Pyrolysis Plant

Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com

Posted on