Stirring tank instructions

I. Overview

I plant the production of a single impeller leaching tank, the Department of Beijing Nonferrous Metallurgy Design Research Institute successfully developed the design, this series of stirred tank leaching with a reasonable structure, large mixing strength, less maintenance, etc., advanced technology, reasonable price, It is in a leading position in similar products in China and can be widely used in gold leaching, storage and other metallurgical, chemical industry mixing and mixing operations.

Second, the characteristics and use of single impeller leaching agitation tank

(1) The power consumption is small, the axial speed is large, the radial speed is small, the stirring intensity is large, and the mixing effect is good.

(2) The impeller is lightly loaded above the “slurry sedimentation zone”, so the starting power is small, which greatly reduces the labor intensity of the operator.

(3) The effective volume is large and the floor space is small.

(4) The impeller has novel materials and long service life.

Simple (V) structure, and easy maintenance, by small and medium beneficiation plant Welcome, this agitation tank for high viscosity settlement rate than the major ore -200 mesh fineness below 85%, the slurry concentration is less than 45% (by wt. Gold leaching adsorption and other mixing and mixing operations.

Third, the working principle of single impeller leaching agitation tank

The single impeller is clockwise (viewed from top to bottom). The blade immersed in the slurry rotates and pushes the slurry. The slurry flows from the upper part of the circulation cylinder to the blade and flows downward through the guide vane. When the slurry passes through the circulation After the cylinder, it will move into the lateral direction, then flow upward along the outer wall of the circulation cylinder, and then return to the upper part of the circulation cylinder to form a closed loop. As the new slurry continues to be fed into the tank, the qualified pulp which is thoroughly mixed by the agent and the air will continue to be continuously The discharge port (overflow port) is discharged, and the leaching operation of the tank is completed.

Fourth, the working principle diagram of single impeller leaching agitation tank (see Figure 1)

Figure 1 Working principle diagram of single impeller leaching agitation tank

5. Technical data of single impeller leaching agitation tank (see Table 1)

Table 1 Single Impeller Leaching Stirring Tank Technical Data Sheet

Six, ordering instructions

(1) The single impeller series leaching agitation tank produced by our factory has the form of flat bottom groove, among which Φ1500×1500, Φ2000×2000 and cone bottom groove form, the user needs to supply the supply requirements when needed.

(2) Regarding the position of the ore supply, the discharge port and the discharge port on the cylinder, it can be supplied according to the requirements put forward by the user, otherwise it will be manufactured according to the original design.

(3) The release pipe and valve shall be provided by the user.

(4) If the user has other special requirements, please come to negotiate with us, the factory can be manufactured according to special requirements.

Swaged Fitting

Swaged fittings can be made of different materials such as carbon steel, stainless steel, brass, aluminum and etc,which have multiple standards and threads forms. The most popular ones include JIC(Joint Industry Council), NPT(National Pipe Thread), BSPP(British Standard Pipe Parallel), ORFS(O-ring Face Seal), Metric, JIS(Japanese Industrial Standard), and Code 61 62 Flanges. This Hydraulic Fittings is convenient to install,but a tightening process is added.After the hose is damaged, the hose connector cannot be reused, and it is matched with the steel wire Braided Hose to form an assembly. It can be used in conjunction with welded pipe joints with O-ring seals. This hose coupling is suitable for pipeline systems with oil, water and gas as the medium.swage connectors can be crimped to one piece fittings to be ready to use for hose assemblies. Or they can be two piece fittings to be crimped with hose together to become hose assemblies.

Swaged Fitting,Quick Coupling,Jic Hose Fitting,Hydraulic Hose Fitting

Luohe Tiema Hydraulics CO.,Ltd , https://www.hydraulichosesdirect.com