Supply Brushless DC 12 V Solar Submersible Water Pumps

Model NO.: TY15101603
Application: Submersible Pump, Clarified Water Pump, Fountain
Size: 46X45X35
Weight: 0.12kg
Package: Neutral Packing
Trademark: Pumtip
Specification: CE
Origin: Ningbo China
Model NO.: TY15101603
Application: Submersible Pump, Clarified Water Pump, Fountain
Size: 46X45X35
Weight: 0.12kg
Package: Neutral Packing
Trademark: Pumtip
Specification: CE
Origin: Ningbo China
Voltage Frequency Power Output H-Max Weight Dimensions
V Hz W L/H M kg MM
9~12 50/60 4~5 500 1.5~2 0.12 46X45X35

Product features:
1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
 
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show

 

Voltage Frequency Power Output H-Max Weight Dimensions
V Hz W L/H M kg MM
9~12 50/60 4~5 500 1.5~2 0.12 46X45X35

Product features:
1) adopted the reversing electronic components, do not need to use the carbon brush.
2) with high-performance wear-resistant stainless steel shaft and shaft sleeve with magnets by injection molding into overall to avoid wear and tear, greatly enhance the life (can take up to 10 years, without maintenance);
3) completely isolated part of the stator and rotor part of the water pump, stator and circuit board part USES epoxy potting, 100% waterproof;Can the amphibious 2 with!
4) part adopts permanent magnet rotor, pump body use environmental protection material, low noise (less than 35 db), small volume of high efficiency low power consumption;
5) can be regulated by the stator winding of required parameters, can run wide voltage, such as 12 v can be modulated 1 M head, also can be 1.8 M head modulation;
6) the pump fixed base with suction cups.
 
Directions for use:
1. No overpressure operation.It is forbidden to exceed the highest voltage.Battery charged if no limited pressure measures, will be serious overpressure, cannot guarantee their supply voltage test first, please.
2. Not allowed to use the ac power, the router power supply, the power of the computer the cat and the like are a lot of communication, can't use!
3. Ripple problem (the most vulnerable places) : most of the half-wave rectifier dc transformer, the result is mixed a lot of communication in dc component, the pump will be bad!Brushless pump must be full-wave rectifier!Don't understand, please consult a professional!
4. Lift problem: 2.2 meters such as lift is not to say that can spray 2.2 meters high, the power is connected head is pointed out that the gate after the hoses, the vertical height in water in the pipe.Spray height is lower than lift a lot!
Enterprise live show

 

Paper Rewinder Machine

We are good reputation China paper making machinery manufacturer, we can mae different kinds of paper making machinery (Kraft Paper Machine, Corrugated Paper Machine, flute paper machine, A4 Paper Making Machine etc.) as well as the pulping system and auxiliaries. Rewinder machine is one of our unique products, this series of underfeed paper rewinder machine is shaftless-type, double supporting rollers. The whole structure is split type. Drive control mode: DC motor drive and AC motor drive. Tension control mode: electrical direct tension control and electrical indirect tension control.

Rewinder Underfeed

Paper Rewinder Machine,Paper Mill Machine,Paper Rewinding Machine,Paper Rewinder Machinery

Dandong Tianshin Automatization Technology Co.,Ltd , https://www.tianshinmachine.com

Posted on