Uhv Angle Valves/Aluminum Angle Valve with CF Flange

• Model NO.: CDQ/CD
• Leak Rate: 1.3X 10-7 PA L/S
• Trademark: cbvac
• Specification: Stainless steel/ Aluminum
• HS Code: 8481804090

• Using Range: 1X 10-7PA-1X 1.2X10 5PA
• Cycles Until First Service: 200000 Times
• Transport Package: Carton
• Origin: China

           
UHV Angle Valves/Aluminum Angle Valve with CF flange
 

1.  Brief Introduction

This series valves are applicable to the vacuum line's start and stop of ultra-high vacuum system. They are two different vacuum block valves; these are manual ones and pneumatic ones. They have many advantages, such as stability, durability, great sealing, and long service life and so on, so they are one of initial optional valves in ultra-high vacuum equipment. Manual valves take manual rotating handle as motivity, and helical transmission to make valves start and stop. The direction of start and stop takes marks on the handles as the standard. Pneumatic valves take compressed air as motivity to make valves start and stop. Valve plates will close automatically depending on spring force when losing air source. Applicable medium can be pure air and non-corrosive gas.                               

1. Features

1. Design in a standard and moduling way. Easy to change and maintain.
2. Easy to clean up.
3. Adopt stainless steel bellows and viton O-ring, no lube.
4. The inner of valves' body is welded by stainless steel and the leak rate is low.

1. Order Information

The order numbers of each product are as follows. Customers can search the numbers according to the operation mode of valves and DN.
Order Example:  2089
     High Vacuum Manual Block Straight Valves, DN=16mm, CF flange

1. Major Capacity Targets:

1. Application scope:1×10^-6pa~1.2×10⁵Pa
2. Differential pressure before open valve plates:≤1.2×10⁵a any direction
3. Leak rate of valves' body and base: <1.3×10^-7Pa·L·s^-1
4. Cycling numbers before initial repair:200,000times
5. Baking Temperate of valve bodies:Open≤200ºC;Close≤150ºC
6. Position of installation: Any direction
7. Power supply:AC 220V 50Hz,6W or DC 24V,3W()(Cycles until first service)
8. Compressed air(only supply to pneumatic valves):0.4~0.7MPa
9. )Speed of closing and opening (only supply to pneumatic valves):≤1s
10. Indications of valves' position

-manual valves: with indication of start and stop's positions
- pneumatic valves: with indication of start and stop's positions(magnet switch)

1. Valves' weight: Referring to the above table.

1. External Dimensions

1. Manual

               Pneumatic   
 
CF flange are subject to GB/T 6071-2003
Optional Parts:  Magnet switch.

We can OEM and ODM as the drawing and your requirement 


Packaging & Delivery

Packaging Details:    Inner: plastic bag. Outer: carton or wooden case or according to customers' need.
Delivery Detail:    Shipped in 3 days after payment

Our company introduction 
 

Chuanbei Vacuum Technology (Beijing) Co., Ltd.(Registered Brand CBVAC), founded in 2002, is national new-high technology enterprise, the Chinese Vacuum Association key enterprise specialized in vacuum products development, design, production, sales and service. We took the major projects task from MOST, the intelligent digital workshop from NDRC, technology upgrading from MIIT and so on.

 CBVAC posses various series of vacuum valves, vacuum pumps, vacuum bellows, vacuum flange connectors and customized chamber processing, vacuum system integration and other vacuum products. The industry belongs to high-end equipment manufacturing industry. The vacuum products and technologies are widely applied in new energy, new materials, aerospace, semiconductor, IC equipment and other fields, also we design and manufacture products in the vacuum technology application fields from universities and scientific research institutions.

Our Product Range

 

 

Air Compressor

As you can see our selection of air compressors including portable air compressors, small air compressors, electric & gas air compressors and much more.

An air compressor is a device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air). By one of several methods, an air compressor forces more and more air into a storage tank, increasing the pressure. When the tank's pressure reaches its engineered upper limit, the air compressor shuts off. The compressed air, then, is held in the tank until called into use.

The energy contained in the compressed air can be used for a variety of applications, utilizing the kinetic energy of the air as it is released and the tank depressurizes. When tank pressure reaches its lower limit, the air compressor turns on again and re-pressurizes the tank. An air compressor must be differentiated from a pump because it works for any gas/air, while pumps work on a liquid.

It mainly used in a lot of drilling fields, such as Water Well Drilling Rig in rocky layer,DTH Drilling Rig in rock works,underground jumbo drilling rig,percussion drilling piling rig,Core Drilling Rig in geological investigation and so on.

Single-Stage Diesel Screw Type Portable Air Compressor
You can apply portable air compressors to industries such as:
-Mining
-Roadwork
-Railway
-Shipbuilding
-Water conservancy
-Urban construction
-Energy
Yikyui portable compressors are efficient and reliable.. The single stage compressor offers the following aspects:
Air Compressor and Mud Pump For Drilling Equipment
Air flow control system that conducts 0 to 100 percent of airflow income and adjusts accelerator
Operation parameters that have stop and alarm functions
Multi-stage air filter that`s ideal for dusty work environments
Easy and convenient maintenance

Two-Stage Diesel Screw Type Portable Air Compressor
Our Compressor provides a two-stage portable screw air compressor to similar industries and applications as the single-stage device. Its power range is 50-400 horsepower with a discharge quantity covering 1060 CFM and discharge pressure stacking up to 320 psig. It also has the following characteristics:

Triple oil and gas separation system and triple air filtration system
SKY2 patent air end with the highest pressure of 5,000 PSI
A heavy electronic injection diesel engine
Standard configuration with aspects like heavy duty air filter, compressor controller and acoustical enclosure
Optional features, such as after cooler and a fuel heating system

Air Compressor and Mud Pump For Drilling Equipment

Quality and Economic Portable Air Compressors For Sale
If you are looking for more information about Yikyui portable rotary screw compressors, or All Kind of Air Compressor and Mud Pump For Drilling Equipment,contact our team of experts. No matter your industry, our portable compressors can provide efficient, reliable operation to meet your compressed air needs. You have several different types of portable air compressors to choose from, and we are here to help you make the best decision for your company.

Air Compressor,Dewalt Air Compressor,Kobalt Air Compressor,Portable Air Compressor

Henan YK Prospecting Machinery Co., Ltd , https://www.yikyuirig.com