![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The southern part of the country is located in arid areas. The irrigation technology of fruit trees is backward and the management is extensive. On the one hand, water resources are wasted. On the other hand, the quality of fruits is poor and the benefits are low. This has seriously hindered the development of the forest and fruit industries and urgently required the development of suitable southern orchards. Agronomic water saving measures. At present, there are few reports about the coverage of orchard coverage in southern Xinjiang. Sun Xia and Chen Wenyan have studied soil physicochemical properties under different soil management measures in Nanjiang pear orchard, and they have been applied to different coverage measures in southern Xinjiang orchards, especially apricot orchards. The study of changes in soil moisture and temperature has not been reported. In this paper, through field experiments, the characteristics of soil water storage and soil temperature changes after the plastic film covering measures and forage covering measures in apricot gardens in southern Xinjiang were studied to provide a theoretical basis for exploring the agronomic water saving measures suitable for the southern Xingyuan Garden. Technical Support.
The effect of the cover measures on soil temperature is mainly reflected in the fact that, through physical cover, the heat exchange capacity between the soil surface and the atmosphere is reduced, thereby improving the soil thermal conditions. Taking the surface soil as an example, the diurnal variation characteristics of soil temperature at different depths of 5 cm were shown. It can be seen that the plastic film covering treatment has a better temperature-increasing effect than that of the straw covering treatment, and the plastic film covering treatment is better than the straw covering treatment. The average daily soil temperature was higher by 29% at a depth of 5 cm in the surface layer, mainly because the sealability of the plastic film was much better than that of the straw curtain.
Compared with the non-coverage treatment, the coverage of the apricot orchard soil can be significantly improved by the portable soil moisture temperature quick-measuring instrument. The plastic film covering treatment has better water storage and retention capacity than the draught covering water storage. With regard to the conservation capacity, its conservation capacity is increased by about 30% and about 10%, respectively, compared with soil conservation capacity without treatment. The physical properties of the soil include water, heat, and gas. The plastic film covering treatment has better water retention and heat retention than the grass curtain covering treatment. Relatively speaking, its permeability is poor, and the plant is in the soil water, heat, and gas. Growing under the influence of the integrated environment, therefore, coverage measures should be selected for the suitable growing environment of crops or fruit trees. In addition, for the extreme arid climate conditions, what kind of cover measures and cover measures have influence on the growth of apricot trees, such as in different soil materials underground, after the use of covering the soil air permeability, soil microorganisms, etc., and then on the development The impact has yet to be further studied.
Hi-Carbon Steel Cut Wire Shot, also named Reinforced Steel Shot, has a great effect on die casting parts which has a high hardness because Longlived Hi-Carbon Steel Cut Wire Shot also have high hardness while other Metal Abrasive can not meet.
Longlived Hi-Carbon Steel Cut Wire Shot is made from high quality hi-carbon steel wire by drawing, cutting and rounding. Its chemical composition is : Si:0.10-0.30%, Mn:0.40-1.20%, C:0.45-0.85%, S≦0.04%, P≦ 0.04%. Longlived Hi-Carbon Steel Cut Wire Shot is producted strictly in accordance with German standard VDFI8001/2009 and American standard SAEJ441,AMS2431. There are four types of hardness of Longlived Hi-Carbon Steel Cut Wire Shot and they are HRC 45-50, HRC 50-55, HRC 55-60 and HRC 58-63. As the development of advance technology of Longlived Metal, we have five shapes and they are as cut, G1, G2, G3 and even G4 condition, which could meet most requirement of clients. In addition, the size of Longlived Metal is from 0.25mm-2.5mm and size also could be customized if need. Longlived Hi-Carbon Steel Cut Wire Shot has a great fatigue life and it could be recycled from 3,500 times to 9,000 times. It could not only save cost but also make shot blasting faster and cleaner.
Hi-Carbon Steel Cut Wire Shot,High-Carbon Steel Cut Wire Shot Peening,High-Carbon Steel Cut Wire Shot Blasting,High-Carbon Steel Cut Wire Shot Distributor
Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com