Automatic sealing machine introduction and use of matters needing attention

Automatic sealing machine is also called sealing tape for carton sealing. It is economical and easy to adjust. It can complete the action of upper and lower sealing at one time. It can also use printing tape and can improve product image. It is the first choice for automatic packaging companies. Suitable for carton sealing packaging, can be a stand-alone operation, but also supporting the use of the assembly line.

Automatic sealing machine classification:

According to the degree of automation of the machine, it can be divided into automatic sealing machine and semi-automatic sealing machine;

According to the use of the machine, it can be divided into automatic carton sealing machine, packing and sealing machine, automatic folding and sealing machine, etc.

Other categories: stainless steel intelligent sealing machine, pneumatic sealing machine, corner edge sealing machine, side sealing machine, adhesive tape sealing machine and so on.

Automatic sealing machine features:

1. Sealing machine structure uses screw and chain to adjust two widths simultaneously. 2. The new patented tape dispenser for imported carton sealing machine parts is used. No blower blows the high-strength adhesive tape, and the patented film pressing device makes the tape stand upright without bending, resulting in failure to affix. The carton sealing is convenient.

3. The width of the belt design is better. The design of the ring buckle type connection will not cause the degumming breakage. It is very easy and fast to replace the belt with the sealing machine.

4. Sealing tape manufacturers independent innovation of large-scale transmission wheel design, increase bending curvature, increase belt contact area, the belt does not slip, and the service life increases, the sealing machine technology is very mature. The main drive mechanism of professional sealing machine uses a special high-precision, low noise noise, increase the service life of the belt.

5. The tape folding length at both ends of the carton can be adjusted.

6. Sealing machine factory design without tape alarm series, automatic door opening device to ensure maintenance safety. Automatic sealing machine workflow

Automatic sealing machine function

Automatic sealing machine is mainly used for carton sealing and packaging. It can be used as a stand-alone machine or used in conjunction with assembly lines. It is widely used in household appliances, textiles, food, department stores, pharmaceuticals, and chemical industries. The sealing machine adopts tape to seal the carton, which is economical and easy to adjust. It can complete the upper and lower automatic sealing actions at one time. If the tape is used, the product image can be improved.

Automatic sealing machine components

Height-raising agencies, press-fitting agencies, transport containers, widening agencies, racks, hot melt adhesive systems, etc.

Automatic sealing machine working principle

After the product is packaged, it is sent to the sealing machine through the conveyor chain (belt, roller) and submitted to the delivery mechanism. The folder sandwiches the two sides of the carton and moves forward. The front short tongue is automatically bent by the tongue-pressing frame, and when the short tongue is in the carton into the sealer roller, a detection signal (opto-electrical signal) informs the tongue-cylinder movement, and the tongue frame is used to bend the tongue. At the same time, there is a signal to inform the fusion. The glue machine automatically sprays glue. The cartons continue to move forward. The left and right long tongues are automatically bent toward the middle through the guide bar. At the same time, the box mechanism belts are pressed synchronously to press the left and right long tongues of the carton so that the boxes, tongues, and glue are glued together to complete the plastic sealing action. The last process - automatic sealing.

Automatic sealing machine structure

General sealing machine is divided into 16 parts, respectively

1, rack

2、Worktable adjustment tripod

3, conveyor belt

4, power switch

5, emergency stop switch

6, guide rod

7, guide rod lock hand wheel

8, the next movement

9, guide wheel

10, guide plate

11. Guide wheel lock hand wheel

12, the movement

13, sealing tape

14, transmission

15, lift the handle

16, auxiliary workbench

Automatic sealing machine application

The sealing machine adopts adhesive tape to seal the carton, which is economical and easy to adjust. It can complete the upper and lower sealing actions at one time. It can also use printing tape and can improve the product image. It is the first choice for automated packaging companies. The key component of the sealing machine is the drive motor. The greater the motor power, the better. Sealing machine can be divided into semi-automatic sealing machine, automatic sealing machine, automatic sealing machine, folding lid sealing machine, corner edge sealing machine, side sealing machine. Xinyang Lianguang sealing machine features lightweight and durable, simple operation; widely used in home appliances, electronics, food, dairy, oil, cosmetics, beverages, electrical appliances and other manufacturing industries.

Automatic sealing machine technical parameters:

power supply:

1P 110V/220V 50Hz/60Hz 300W/470W

speed:

30 boxes/min

Sealing size:

L150～∞ W120～480 H120～480(mm)

Tape size:

48 ~ 72 (mm) kraft paper tape, BOPP tape

Machine size:

L1090mm x W890mm x H1280mm

Transport size:

L1200mm x W1050mm x H1435mm

Gross weight / net weight:

250kg/200kg

Optional accessories:

1. External roller table 2. Caster 3. Made of stainless steel

Automatic sealing machine troubleshooting

1. The clamp of the sealing machine is too slow or the stroke of the clamp is insufficient: the bolts are loose, and the front buckle or the inner piece of the trigger wears. At this point the bolts can be tightened, taking care of the correct position of the front buckle shaft. It is also possible to replace the front buckle or the inner panel of the machine. After completing the above actions, test its function. If the stroke is too short, adjust the front buckle shaft upwards. If the movement is slow, adjust the front buckle shaft downwards.

2. Leakage at the piston rod: The bottom ring of the body is damaged. The ring should be replaced at this time.

3. Air outlet leak: Damage to the valve ring or switch seat ring or damage to the piston ring. Replace the ring.

4. Leakage at trigger: Damage to switch valve ring or switch seat ring, replace ring.

5. The drive ring is loose and cannot be positioned: Plastic bars and transmission springs are inelastic. Remove the trigger combination and reinstall the spring tip or replace the plastic bar and transmission spring