Since autumn, rain and fog have been frequent and visibility has been low, and riders need to be careful about driving safety. It is best to do a thorough and comprehensive "health check" for cars in advance. So, what issues need to attract enough attention?
1. The body must be fully maintained for summer rain and hot weather. Rain and rain in summer rain and bright light in summer can cause paint surface corrosion and oxidation. When changing seasons, we must make a series of beauty treatments such as cleaning, polishing, waxing, sealing glaze or coating.
2. Rainy headlights are easy to enter the water If you find that there are water mist in the headlights, you can turn on the headlights and high beam lights at the same time to see if the water mist in the headlights disappears after 10 minutes and disappear completely after one hour. Don't worry if you disappear. However, if there is water fog, it must go to a professional service station.
3. Cars wading and checking the circuit in time Many rains may affect the performance of some parts of the car due to rain, and in severe cases can cause the car to not start properly. The circuit is likely to cause a short circuit after being exposed to water. If the engine is off, the engine cannot be re-ignited to start. Otherwise, the engine may be easily scrapped. After the car is wading, the circuit equipment should be checked in time. The circuit can be wiped dry with a non-fiber paper towel and textiles, and then started again.
4. Sterilization and cleaning of the interior It is necessary to thoroughly pass through a summer of rain and hot weather. Carpets and plastics and other hidden places have already been breeding many bacteria. When the autumn arrives, the windows are no longer open, and the air inside the cabin becomes turbid. Odors and bacteria can harm human health. At this point, it is necessary to do a thorough interior sterilization cleaning for the car.
5. Air conditioners must be fully maintained Air conditioners are often overloaded during the summer. In the fall, it is necessary to do an air conditioning inspection and maintenance. Summer rain, water vehicles often walk some wading, the air conditioning condenser will inevitably contaminated the lower part of the sand. Over time, sediment and dust are heavily deposited, which seriously affects the air-conditioning life.
6. Anti-corrosion, anti-rust and sound insulation of the chassis The car that has experienced many heavy rains will be affected by rain and mud. At this point, you need to do some maintenance work on the car chassis. In addition to simple cleaning, "chassis closure" is also a good choice. It can make the chassis isolated from the outside world, anti-corrosion, anti-rust, and sound insulation to extend the life of the vehicle body. Before the “chassis sealing,†use a detergent to remove the asphalt, grease, and drying that adhere to the chassis. Any stains will affect the tightness of the seal. In addition, check the chassis for scratches and screws.
Mechanical mold frame: an important role in modern manufacturing process
With the continuous progress of science and technology, the development of modern manufacturing technology is changing with each passing day. Among them, the mechanical plate mold frame plays a decisive role. This paper will discuss the concept, design principle, application field and future development trend of mechanical plate mold frame in detail, and reveal its important position in modern manufacturing industry.
First, the basic concept of mechanical plate mold frame
A mechanical die frame, also known as a die frame, refers to a metal structure used to hold and support a die. In the manufacturing industry, mold is an important production tool, used for forming, cutting, stamping and other processes. As the carrier of the mold, the quality of the mechanical plate mold directly affects the performance and production efficiency of the mold.
Second, the design principles and methods of mechanical plate mold frame
1. Stability: The mechanical die frame must have sufficient stability to ensure that there will be no deformation or vibration during the production process.
2. High precision: In order to ensure the precise fit of the mold, the mechanical plate mold frame needs to have high precision processing requirements.
3. Easy maintenance: Convenient and quick maintenance and replacement of molds is an important consideration in the design of mechanical plate molds.
4. Diversity: For different kinds of molds, mechanical plate molds need to have a variety of specifications and adaptability.
Third, the application field of mechanical plate mold frame
Mechanical die frames are widely used in various manufacturing fields, such as automobiles, electronics, aerospace, furniture and so on. There are many kinds of molds, including injection molds, die casting molds, stamping molds, etc., and each mold needs the corresponding mechanical plate mold frame to support.
Mechanical Plates,Plastic Formwork processing,Plastic Shuttering manufacturing,Plastics Mold Design
Shuaigang Mould Base (Yixing) Co., Ltd , https://www.shmouldbase.com