·BMW filing will recall nearly 80,000 problem cars

It was learned from the General Administration of Quality Supervision, Inspection and Quarantine that BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. filed a recall plan with the AQSIQ and decided to recall 79,735 problem vehicles from July 8, 2015. These include more than 53,000 imported X3 models and 15,000 BMW Brilliance 3 models.

Due to the manufacturer's manufacturing reasons, some of the vehicles in this recall range have poor nickel plating coating on the electric fuel pump parts in some batches. When the oil pump is running, excessive friction will occur inside, causing the oil pump to work abnormally. Even failed. The vehicle may not start when the fault occurs. In extreme cases, the vehicle may be turned off and there is a safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) will inspect the vehicles within the scope of the recall and replace the fuel delivery unit (including the electric fuel pump) for the problematic vehicles to eliminate safety hazards.

The recalled models include 1,500 BMW 3 Series vehicles produced by BMW Brilliance from October 26, 2013 to March 28, 2014. BMW (China) imported from June 14, 2012 to March 17, 2014. During the period, the BMW 1, 2, 3, and 4 models produced a total of 11,417 vehicles.

In addition, BMW will also recall some imported X3 models, the production date is from October 1, 2011 to December 1, 2013, involving a total of 53,317 vehicles in mainland China. Vehicles within the scope of the recall, the power supply harness of the electric fuel pump may interfere with the pressure regulating valve on the fuel delivery unit, which may cause damage to the harness during use of the vehicle. In certain cases, an internal short circuit may occur. When a defect occurs, it will cause the engine power to drop and shake, and the possibility of the vehicle stalling is not excluded, and there is a safety hazard. BMW (China) will inspect vehicles within the scope of the recall and repair or replace the fuel delivery unit free of charge for vehicles in question to eliminate potential safety hazards.

>>Recalling model list

BMW Brilliance 316i, 320i, 320Li, 328i, 328Li, 335Li

Imported BMW

116i, 118i, 125i, M135i,

220i, M235i

320i, 328i, 335i, 320i travel version, 328i travel version

420iCoupe, 428iCoupe,

435iCoupe, 428i Convertible, 435i Convertible

320iGT, 328iGT, 335iGT,

420iGranCoupe, 428iGranCoupe

BMW X3

X3xDrive20i, X3xDrive28iX3xDrive35i

Stearic Acid

Stearic acid is widely used in the manufacture of PVC plastic pipes, plates, profiles, and films. It is a PVC heat Stabilizer with good lubricity and good light and heat stability. In plastic PVC pipes, stearic acid helps prevent "coking" during processing. It is an effective thermal stabilizer added in the processing of PVC films, and can prevent finished films caused by excessive exposure to sulfides.

Mainly used to produce stearates: sodium stearate, magnesium stearate, calcium stearate, lead stearate, aluminum stearate, cadmium stearate, iron stearate, potassium stearate.
Widely used to make cosmetics, plastic cold-resistant plasticizers, mold release agents, stabilizers, surfactants, rubber vulcanization accelerators, waterproofing agents, polishing agents, metal soaps, metal mineral flotation agents, softeners, pharmaceuticals and others Organic chemicals.
In addition, it can also be used as a solvent for oil-soluble pigments, a crayon slip agent, a wax paper polish, and an emulsifier for glyceryl stearate.
The product is used as a lubricant, defoamer and food additives in the food industry as a raw material for glyceryl stearate, sorbitan stearate, and sucrose esters. Used as the raw material of additives and the raw material of daily chemical products.
Stearic acid is widely used in the manufacture of PVC plastic pipes, plates, profiles and films. It is a PVC heat stabilizer with good lubricity and good light and heat stabilization. In plastic PVC pipes, stearic acid helps prevent "scorching" during processing. It is an effective heat stabilizer added in the processing of PVC film, and it can also prevent the finished film caused by exposure to sulfide. Discoloration.

Stearic Acid,Industrial Stearic Acid,Chemical Stearic Acid,Agent Stearic Acid

Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com