![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Concrete mixer truck operation and use procedures
1) Inspection must be performed before operation to ensure that the steering, braking, lighting, and signal systems are sensitive and effective. No cracks and serious damage are caused to the drums and chutes of the mixer truck. The blades are worn within the normal range, and the U between the chassis and the subframe is The bolts are well connected.
2) Understand construction requirements and site conditions. Select driving directions and parking locations.
3) Driving on social roads must obey the traffic rules. The turning radius should meet the requirements of the instruction manual, and the speed should not exceed 15 km/h. The speed of entering the station shall not exceed 5km.
4) It is forbidden to touch the rotating rollers and rollers by hand.
5) When reversing the unloading, it must obey the command, pay attention to the surrounding personnel, and immediately stop the vehicle if any abnormality is found.
6) It is forbidden to perform cleaning under the high voltage line.
Concrete mixer truck loading and maintenance procedures
1. During the running-in of new equipment, please do not load it at full capacity. It is recommended that 70%-80% of the loading capacity be loaded and the running-in period should be 3000km.
2. Before switching between positive and negative rotations, the operating handle must be returned to the neutral stop position, that is, the can body stops rotating and then changes direction, otherwise the reducer may be seriously damaged.
Third, in the high-speed or full-load climbing, the tank should stop turning to ensure traffic safety.
Fourth, all the connection screws should be regularly checked and fastened; all the lubrication points must be regularly filled with lubricating oil, regular inspections to replace the hydraulic oil, gear oil.
5. It is not advisable for the vehicle to load a slug with a slump of less than 12cm. Do not load a slug with a slump of less than 10cm.
6. Clean the inside and outside of the tank and keep the tank clean.
Seven, other maintenance details, please follow the "user's manual" implementation.
The Pelletizer Granulator makes damp granule into beautiful pellet by setting rotating centrifugal disk, blower and pneumatic nozzle. Feed damp granule into rotating centrifugal disk, start fan then start rotating centrifugal disk , It can make the damp granule undertaken the action of air floating force in ring gap, rotating centrifugal strength and gravity itself, It can make high degree ball shape pellet.
Pelletizer Granulator
Pelletizer Granulator,Pelletizer Granulating ,Dry Granulator
Changzhou Jiafa Granulating Drying Equipment Co.,Ltd , http://www.jf-drying.com