Dongyue Group starts 400,000 tons/year of silicone project

On July 7, Dongyue Group held a ground breaking ceremony for the 400,000-ton/year silicone project. The project is currently one of the largest organic silicon projects in China. It is an important part of the Dongyue International Fluorine-Silicon Material Industrial Park's key projects and the park's high-tech industrial chain, marking the Dongyue Fluorine-Silicon Material Industrial Park from fluorine-containing materials to the Fluorine-containing and silicon-containing materials have taken a solid step.

Silicone is known as "industrial monosodium glutamate" and its application is very extensive. Its production technology level and scale reflect the development level of a country's material industry to a certain extent. With the economic development of our country and the improvement of people’s living standards, the demand for organic silicon monomers and organic silicon materials has grown rapidly at a rate of more than 25% per year. As the production of organic silicon monomers lags behind the growth in demand, a large number of organic silicon monomers are imported every year, and imports account for about 70% of domestic consumption. According to the prediction of China Fluorine-silicon Organic Material Industry Association, due to the rapid development momentum of organic silicon processing industry in China, although the output of organic silicon monomer in China will reach 1 million tons/year during the “Eleventh Five-Year Plan” period, At the end of the year, 30% of domestic silicone monomers are still imported.

As the largest silicone project in China, Dongyue Group has a total investment of 4.5 billion yuan for 400,000 tons/year of silicone projects, which will be constructed in two phases. The first phase of the project is a 200,000-ton/year organosilicon monomer (dimethyl dichlorosilane) device and its associated equipment, which will be completed in December 2007. The second phase of the project will be completed in December 2009. After the completion of all the projects, annual sales income of 5 billion yuan and profits and taxes of 700 million yuan can be realized.

Introduction:

 Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance. Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but soon replaced.

 

Features:

Five LED indicators show the test results more accurate.

Testing DOT 3, DOT4, DOT5 brake fluid

Press the switch to turn on the power, the green LED light that represents the battery properly, the green light does not shine on behalf To replace the battery

Automatic shutdown

 

Specification

1, check the car brake oil quality

2,5 LED lights display the percentage of moisture content in brake fluid

3, auto power off

4, 1 LR03 AAA batteries (not included)

 

 

1, the green LED lights = water content in the brake fluid H2O <1.5%, brake fluid qualified

2, the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later

3, the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced

Red LED: change brake fluid

4, LED red flashing: battery replacement

5, LED yellow: low moisture content, check again in six months

6, LED green: brake fluid lines / cell row

 

 

 

Brake Fluid Tester

Brake Fluid Tester,Electronic Brake Fluid Tester,Brake Fluid Test Strips,Brake Fluid Moisture Tester

Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com