What are the usage and maintenance of ultraviolet sterilizer?

Ultraviolet sterilizer adopts modern UV disinfection technology, based on high-efficiency, high-intensity, long-life UV lamp disinfection equipment manufactured with special planning, technology, and materials, and uses the high-efficiency, broad-spectrum killing ability of ultraviolet rays to kill. Bacteria, viruses, parasites, protozoa, etc. in the water, reach the intention of water purification and disinfection.

Ultraviolet sterilizer maintenance maintenance (1) regular viewing to ensure the normal operation of the UV lamp.

(2) After successive use of 9000 hours or one year, ultraviolet lamps should be replaced to ensure high sterilization rate. Please pay special attention to the situation that ultraviolet light should continue to be on, because repeated opening and closing will seriously affect the lamp life.

(3) When replacing the UV lamp, unplug the lamp socket and take out the UV lamp. When replacing the new lamp, pay attention not to touch the quartz glass of the new lamp with your fingers. Since the stain will affect the sterilization lamp, carefully put the lamp into the stainless steel sterilizer together.

(4) If the water has hardness (calcium or magnesium) substances, iron or manganese, the quartz tube needs regular cleaning. After cleaning the quartz tube, a special plastic glove should be worn to carefully put the quartz tube into the reverb instrument, and the sealing ring should be checked to see if there is any water-leakage phenomenon. Plug in the power supply to ensure that the detection lamp is stable and bright.

Note: Ultraviolet rays have a strong lethal effect on bacteria, and have the same damage to the human body. The most vulnerable part of the human body is the cornea of ​​both eyes. Therefore, it is not possible at any time to look directly at the lighted lamp to avoid injury. , If necessary to look, use general glass (wearing glasses) or transparent plastic sheet as a protective mask.

Do not misuse quartz glass, as glass is almost completely impermeable to ultraviolet light. Once injured, there is no need to panic, face burns, and after a few days the epidermis falls and he is cured. Eyes will be red and swollen, tears, tingling, and recover in about three or four days. In any event, as soon as the injury is encountered, it is still advisable to seek medical advice immediately.

Shijiazhuang Yingdu Environmental Protection Equipment Co., Ltd. is a high-tech enterprise located in Qiaodong District, Shijiazhuang City, Hebei Province. Welcome to inquire:

Calstar® intelligent automatic Solvent Recovery Machine adopts the advanced imported diaphragm pump and Calstar® vacuum pump, the solvent is transported, the original Japanese hot oil circulation, uniform heating, Italy original hydraulic scraper power, recovery speed is 50% higher than other brand machines, you only need to wait a few hours, it is clean and fresh the use of solvent supply. Can choose a single cycle or 24 hours of continuous automatic cycle operation, one machine built-in automatic feeding and vacuum recovery device of automatic feeding, accurate external digital temperature control, double section multi section temperature control heating set, according to the composition of the mixed solvent to be recovered, the heater temperature of multi section setting, so can make different boiling point solvents in accordance with the order from low temperature and high temperature distillation in batches.Full Automatic Solvent Recovery Machine,Intelligent solvent Recovery Machine,Numerically controlled solvent recovery machine,Solvent recovery integrated machine

Full Automatic Solvent Recovery Machine

Fully Automatic Solvent Recovery Machine,Toluene Recovery System,Thinner Recovery Equipment,Solvent Recycling Systems

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , http://www.calstarkb.com