What kind of material is used for the inside and outside of the Dongguan Haotian ultraviolet aging test box?

What kind of material is used for the inside and outside of the Dongguan Haotian ultraviolet aging test box?

Product function and principle of ultraviolet aging test box: The test box adopts fluorescent ultraviolet lamp as the light source, and conducts accelerated weather resistance test on the material by simulating the ultraviolet radiation and condensation in natural sunlight to obtain the result of material weather resistance. It can simulate environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, darkness, etc. in the natural climate. By reproducing these conditions, they can be combined into a cycle and let it automatically execute the cycle times.

UV aging test chamber box material: the outer shell is made of A3 steel plate sprayed treatment; the inner tank is made of SUS stainless steel plate; the box cover is made of A3 steel plate sprayed treatment; in the studio

A total of 4 UV series ultraviolet lamps are installed on the top; the heating method is titanium alloy high-speed heating, rapid heating, and uniform temperature distribution; the box cover is a one-way push-pull type, easy to open and close; the bottom of the test box uses high-quality fixed foot pads .

The ultraviolet aging test box uses fluorescent ultraviolet lamps as the light source to test materials by simulating the ultraviolet radiation and condensation in natural sunlight. Therefore, the maintenance of the ultraviolet aging test machine is also extremely important.

In order to make the UV aging tester work better and keep it in good condition for a long time, please maintain it according to the following items: If the UV aging tester is not working, keep it dry and disconnect the power supply. After the test, drain the water from the testing machine, and dry the studio and cabinet. After use, remember to put the plastic cover on to avoid the intrusion of dust. If there is dust, it should be removed in time. Do not subject the sensing device in the working room to strong impact;

The UV aging test box is placed in a well-ventilated place (it is recommended to install a ventilation fan to keep indoor ventilation). It should not be installed in a dusty place; if the UV aging test box fails to be eliminated, please contact the relevant personnel. Do not disassemble or assemble without permission; if the test box is not used for a long time, please check the water source, power supply and various parts carefully when you use it again, and start the UV aging test box after confirming that it is correct.