According to relevant reports, on July 15, 2014, Suzhou, the sky was floating with drizzle. Suzhou Industrial Park Sinoma Technology (Suzhou) Co., Ltd. is a tense and orderly construction site for the phase III project of the cryogenic insulated gas bottle production and expansion project test center. The height of the building is more than 20 meters but the span is more than 60 meters. Before this, The highest pump car in Suzhou is 63 meters, which can't meet this construction requirement. Xugong Shi Weiying HB75K pump truck just delivered the customer to receive the order: pouring 1-6/AH axis four-story column roof beam.
Wu Tao, the company’s vice president of sales in East China, Shen Qianli, director of the Pumping Research Institute, and Zhang Haibo, director of the Suzhou Office, coordinated the service staff to observe and guide the team. At 5:45 in the morning, the HB75K pump truck was stationed at the construction site, positioned in the rain, and the steel giant slowly extended its legs at 6 o'clock. As it was the first pumping construction, the customer's person in charge coordinated the pre-pumping mortar and lubricated the conveying pipe. 7 Point 40 points to complete the lubrication. At 8:18, the concrete was pumped for the first time and it accurately fell to the designated position. Since then, this 70 years of lean manufacturing integration with Schweig and Schwing 80 years of global leading technology accumulation, using the industry's first digital bionic 7-arm technology, 360-degree fabric 75 meters pump successfully completed dead-end pouring, one-time pouring The amount of concrete reached 550 square meters and successfully completed the first show.
“The boom is small, tiny, and well-behaved, and the work is stable!†Hu Xingen, head of Suzhou Xinan Construction Machinery Leasing Services Co., Ltd., told reporters excitedly that they were very satisfied with the Xugong 75 meter pump truck that was recently purchased: “The average pumping With a speed of 120 square meters per hour, the pumping suction efficiency can reach over 90%, and the reliability of the whole machine is high. With a pump speed of 63 meters, the HB75K can save half the labor cost and save one-third of the man-hours. Hu Weigen said that the construction of high-rise buildings in Suzhou is now in full swing, and its machinery and equipment are mainly used for high-rise building disposable casting concrete. In the future, they will continue to pay attention to Xugong Shi Weiying's products and will cooperate in the end.
The air-to-Oil Cooler is mainly used in various equipments that use petroleum, lubricating oil, hydraulic oil, etc. as heat medium to achieve the purpose of cooling the high-temperature oil passing through the heat exchanger through air-cooling.
Advantages: Strong corrosion resistance, compact structure, small footprint, and high degree of customization.various air-cooled drive modes, DC motor, AC motor, hydraulic motor, air motor, special explosion-proof motor, etc., better to choose the appropriate drive mode according to industrial environmental factors, without the help of external cooling medium, lower The hardware requirements can be used to cool the oil and ultimately ensure the benign operation of the equipment.
Applications: Construction machinery engines, hydraulic transmission equipment, air compressors, production and processing equipment, industrial spraying equipment, electrical equipment, generator sets, marine equipment, wind power equipment, metallurgical equipment, etc.
Air-Oil Cooler,Air Oil Cooler,Oil Cooler,Oil Cooler Kit
Xinxiang Zhenhua Radiator Co., Ltd. , http://www.thermictransfer.nl