Analysis: China's air energy dryer industry has a promising outlook

In order to expedite the resolution of serious problems in the post-production loss of agricultural products in China, and fully implement the national agricultural product primary processing facilities subsidy policy, the “Notice of Doing a Good Job in the Initial Processing of Agricultural Product Origins in 2014” jointly issued by the Ministry of Agriculture and the Ministry of Finance has recently been officially introduced. . Among them, the subsidy standard for drying facilities is 30%, which will greatly promote the application and expansion of heat pump drying, and will also further promote the development of the air-energy heat pump industry.

In recent years, as the demand for agricultural and sideline products in China has become increasingly clear, the role of dryer equipment in the industry is also growing. As a new type of energy-saving new technology, air energy has largely solved the problems of low traditional drying efficiency and high drying costs. Taking the high-temperature heat pump dryer developed by Tongyi Air as an example, it has the advantages of energy saving and emission reduction, safety and environmental protection, good drying effect, high efficiency and energy saving, low operating cost, saving labor costs and wide range of uses, and is highly praised by the industry. .

At present, air heat pump drying has gradually been applied in many industries. Tongyi Air can be the leading brand in the air energy industry. Its high-temperature heat pump dryers have been widely used in tobacco drying, fruit and vegetable drying, medicinal drying, seafood drying, wax drying, and betel nut drying. , well received by the majority of users. In the dual role of the tilt of the national policy and changes in the concept of consumer spending, the air-energy heat pump dryer will usher in an unprecedented opportunity for development, not only benefits the consumers, but also for energy conservation and emission reduction has played a great The role of promotion.

Introduction: our dished heads are used in a variety of applications and industries such as storage tanks, pressure vessels, road tank, food processing operations, chemical plants ,Nuclear operation, Oil Refining, Architectural feature, power generation.

Due to our forming experience and equipment, we can spin or press the first part of the process of forming your products, It depend on the thickness and material performance,

Our main products are 2:1 SE dished heads, Torispherical heads, Cones,Hemispherical Heads etc

Choosing the right type is the key decision for each customer and one for which our experience team to happy to give advice, simple speaking, the torishpherical heads, the less ressure it can withstand, Conversely, the deeper dished heads, for example Elliptical heads, hemispherical, the greater pressure it can take.

Carbon steel heads are fully formed above 1650F,then allowed to cool and normalize.Chrome alloy steel are forming at higher temperature. The original plate mill heat treatment cycle are repeated to restore the plate to its original condition.

stainless steel and most high-nickel alloy are formed at even higher temperature. then immediately annealed and quenched-solution annealed
All our heads are hot-formed, seamless, and descaled (shot blast for carbon and low-chrome alloys, sand blast for stainless steels, high-nickel alloys, and some "exotic" plates).

Hot Work Dished Head

Hot Work Dished Head,Hot Work Clad Plate Dished Head,Hot Work Hemispherical Head,Hot Work Ellipsoidal Head

YIXING HOKKAI HEAD PLATE CO.,LTD , http://www.hokkaidishedend.com