Chu Sheng teach you: how to see the engine from the engine suction truck power and emission standards

There are rules on the engine model of the suction truck produced by Xiagong Chusheng (Hubei) Special Automobile Manufacturing Co., Ltd. Each type of independent engine will have a corresponding engine code type, and some relevant suction dies will be known. Knowledge of the engine code of the vehicle can tell which type of engine is included in the engine model code. Some detailed engine technical parameters such as engine horsepower, displacement, bore diameter, stroke, emission standard, and manufacturer can be seen. The following is the knowledge introduced by Chu Sheng factory staff:

The serial number of the cylinder bore of the suction truck:

The serial number of engine products used in the series is the cylinder bore and stroke series, and the same bore diameter and stroke are composed of the same series code 6 code. The uppercase alphabetic letters indicate that the numbers are as follows:

Series code Bore x stroke Series code Bore x stroke A 108x132 E 110x112
B 108x125 G 112x132
C 108x120 J 105x125
D 108x115 M 120x145
F 92x100 L 140

Power code: The power code is expressed in terms of the actual engine power (in horsepower) using Arabic numerals. When the actual power of the engine (in horsepower) is not 0 or 5, it is selected as near.

Emission code: The emission code is represented by Arabic numerals, the Euro I emission level is denoted by 1, the Euro II emission level is denoted by 2, and Euro III is denoted by 3.

Significant structural improvement code: Major structural improvement code is represented by Arabic numerals, numbered sequentially from 0, Yuchai's current code is 0 cold pressurization or boost; 1 is a single pump, 3 is a high pressure common rail.

In addition to the above code, the following "-XX" represents horsepower. For example, "-26" represents 260 horsepower, 26 is an abbreviation, and so on. E3 is the Euro 3 code. CA6DL2-31, Aowei Engine, 310 hp.

Listed as a suction truck engine model: YC4D130-20 said: Yuchai, four-cylinder, D said a series of engines, 108mm bore x115mm stroke, 130 horsepower, Euro II emissions, basic engine.

Tractor:

20HP Tractor is  mini tractor, suitable for personal farmland, 4x2 two-wheel drive, single cylinder diesel engine.20hp  tractor is easy tocontrol and maintenance.  The mini tractor can reduce labor cost and increase work efficiency.

Tractor Technical Parameters:

Structural type				4x2 two-wheel drive
Rated power(kw)				15.4
Wheelbase(mm)				1290
Wheel track (mm)		Front wheel		900
		Rear wheel		970
Min. ground clearance(mm)				222
Dimension(mm)				2580x1210x1600
Engine type				Horizontal single cylinder, evaporative cooling, direct combustion type
Cylinder numbers				1
Cylinder x stroke (mm)				115x115
CC				1.1945
Rated speed(r/min)				2200
Braking system type				Shoe type brake
Frame type				Half frame
Steering gear type				worm ,mechanical steering

20HP Tractor

20HP Tractor,Mini Tractors,Small Tractors

ZH MACHINERY , http://www.sczhmachinery.com