Model NO.: (Chang An, Yu Tong, King Long, Higer)
Origin: China
Brake shoes, brake padsPackaging & delivery: 15-35 days
Packaging detail: Standard package, fangtian box, brakee box, both are ok
Delivery detail: 30 days after the receipt of order
Specifications:
We are manufacture of brake shoes, we have 900 moulds about brake shoe, which covers Japan, Europe, Korean, uas vehicles. All kinds of our products have stable friction index, small wearing adopt international advanced technology and prescription. All kinds of our products have stable friction index, small wearing rates, low noise and excellent braking features the safety and comforty during driving.
1. Materials: Asbestos, non-asbestos, semi-metal, non-metallic, carbon, ceramic (selectable)
2. Excellent friction performance, stopping power,
3. Proper hardness and strength, good resistance to fade and wear
4. No noise, long lasting working life
5. Reasonable pricing and quality assured product
6. Surface finished: Paint, powder coat; Electronic paint
7. Above surface is ff non-asbestos brake lining
8. Complete range of products for different vehicles
9. Able to manufacture according to customer's sample and trademark
10. Original produce: Made in China
Bus body | side window and safety window |
 | service door |
 | ventilating door and fuel tank door |
 | boarding section |
 | passenger door |
 | mudguard rubber |
 | floor and chair |
 | pneumatic door pump |
 | air pipe and joint |
 | air inlet and auxiliary radiator pipe |
 | parts for rear wall |
 | handrail handrail seat and side wind guardrail |
 | front wall |
Air conditioner and electric appiance | evaporator system of air conditioner |
 | electri wiring harness of air conditioner |
 | external line connection of air conditioner |
 | transmission section of air conditioner |
 | other accessories list of air conditioner |
 | Light fitting and screen wiper on front wall |
 | light fitting on side wall |
 | light fitting on rear wall |
 | ceiling |
 | instrument desk |
 | underinstrument desk |
 | rear compartment |
 | step lamp |
 | undervoltage alarm of power supply (with a buzzer) |
 | wire harness of whole bus |
 | Inner decorations |
Chassis | Engine Suspension |
 | Fuel system device |
 | air cleaner device |
 | Exhaust system device |
 | Cooling system device |
 | Clutch line device |
 | Gearbox device |
 | CA585 gearbox |
 | output shaft assembly |
 | intermediate shaft |
 | peripheral parts of gearbox |
 | reversal idler assembly |
 | gearbox cover assembly |
 | gear shifting control device of gearbox |
 | M3 rear axle main reducing gear assembly |
 | carriage assembly |
 | Front suspension assembly |
 | rear suspension assembly |
 | straight pull rod assembly |
 | wheel assembly |
 | steering device |
 | power steering line device |
 | brake line device |
 | parking line device |
 | electrical device of chassis |
Engine | cylinder block assembly |
 | timing gear champer parts |
 | cylinder head assembly |
 | piston and connecting rod assembly |
 | crankshaft and flywheel assembly |
 | camshaft assembly |
 | valve tappet assembly |
 | intake manifold assembly |
 | exhaust manifold assembly |
 | oil sump assembly |
 | oil strainer assembly |
 | oil pump assembly |
 | oil coarse filter assembly |
 | oil radiator assembly |
 | oil cooler |
 | fuel line assembly |
 | fuel fiter assembly |
 | fuel injection pump assembly |
 | fuel injector assembly |
 | turbocharge assembly |
 | water outlet pipe assembly |
 | water inlet cock assembly for the heater |
 | water pump assembly |
 | clutch assembly |
 | flywheel case parts |
 | steering pump components |
 | air compressor assembly |
 | charging generator assembly |
 | starter assembly |
 | gauge assembly |
EVA Deck Pad for kiteboard deck pad and SUP deck pad comes in two ways normally. One is full sheet for DIY, the other one is die cutting based on customized design.
The full sheet deck pad can be in 230cm x 90cm or 90cm x 90cm size. Customers can cut the deck pad based on their board size, then simply peel and stick since the EVA deck grip we offered it with 3M adhesive. Besides, it can be also used in any other application for traction like boat flooring, yacht flooring and etc.
Eva Deck Pad,Surfboard Tail Pad,Kiteboard Deck Pad,Deck Grip Mat,Sup Board Deck Grip,Traction Deck Pad
Huizhou City Melors Plastic Products Co., Limited , https://www.evadecking.com