The early garbage truck was an ordinary rickshaw and needed the sanitation workers to push it on their own. There were no door panels covering the car. The odor of the garbage would drift with the wind. Sometimes when the wind was heavy, the garbage in the car It will be blown out and it will not work. Nowadays, the garbage trucks are much advanced, and they are transformed from trucks. There is a big tail box, which can hold a lot of garbage. Then the door of the car can also be opened and closed. After loading the garbage, the door panels are closed and the odor is Garbage can't come out. This kind of garbage truck is working many times more efficiently than previous garbage trucks. It can serve many streets a day and keep every street in the city clean.
Medical Oxygen Generator are normally installed in hospitals and clinics, especially for remote areas where cylinder oxygen is difficult to buy.
Medical Oxygen Generator has similar structure with Industrial Oxygen Generator, just at the end pipelines, there are bacteria remover and odd smell remover. Oxygen generator uses Air Compressor to get raw material, the compressed air. The compressed air is treated by air treatment part, which has oil remover, filters and dryer. After treatment, clean air goes to oxygen separator. In this part, the oxygen in the air is separated and collected from top of machine, then goes into a buffer tank to make flow rate stable. At the end of buffer tank, there is flow rate meter and analyzer,etc to adjust flow rate and test oxygen purity.
Details process is as below:
Medical Oxygen Generator Specification:
Flow rate: 1-200 Nm3/hr
Purity: 90-95%
Outlet pressure: 5-10 bars
Medical Oxygen Generator
Medical Oxygen Generator,Medical Oxygen Generators,Medical PSA Oxygen Generator
Shandong Gamma Gas Engineering Co. Ltd. , http://www.gammagas.com