Three functions to solve the fogging of the windows of suction trucks and suction trucks

When the weather is cold, the windows can become foggy. In addition, the weather is foggy. Driving a suction truck or a sewage suction truck is a headache. Many traffic accidents are caused by this. To solve this problem, we must know that there are two conditions necessary to fog, one is high humidity and one is too low temperature. From this we summed up three functions to avoid fogging in the windows:

Method one: spraying anti-fog agent and other preventive methods.

Spray a little mist repellent on the glass window of the car and wipe it clean to remove the dirt and marks on the glass window. When the glass is polished, a thin transparent protective film is formed on the glass, which can effectively prevent condensation of water vapor on the glass and form a fog layer, which is particularly suitable for cold winter days. Can replace anti-fogging agent and detergent, soapy water, glycerine, alcohol or salt water, wait for drying, wipe the excess fiber with suede or a soft dry cloth, it can guarantee the car glass will not be covered within a few days. Fog.

Method two: air-conditioning refrigeration method.

Using air-conditioning cooling and dehumidification, the method of reducing air humidity removes mist. When many people enter the car in summer especially, they do not turn on the air conditioner in time, and the humidity of the gas exhaled by the person is relatively high. The windshield will soon be fogged. At this time, the air conditioner can be turned on to blow cold wind to the front windshield, and the air-conditioning dehumidification function can be used to remove the fog on the front windshield. However, if the humidity is too large and the air conditioning effect is not obvious, a little window can be opened slightly to reduce the humidity in the cab quickly. Of course, it can also be used in conjunction with air conditioning, the effect will be faster.

Method 3: Air conditioning heating method.

Use a method that reduces the temperature difference to remove fog. Warm air blowing hot air to the glass, the glass temperature prior to the rapid increase, decrease suction sewage truck, suction truck window glass temperature difference between inner and outer surfaces, it may prevent the front windshield of the heavy mist, but one thing described later And the temperature of the glass on the side rises slowly, so it takes a long time to remove all the fog. Note: Whether it is automatic or manual air-conditioning, air-conditioning is open, is conducive to dehumidification; air-conditioning temperature control should not be in the coldest position, otherwise prolonged defrosting windshield glass outside easy to fog.

1. Naipu Pump offers all metal wet parts with high chrome white iron (27% chrome).The high chrome white iron is a very good wear-resistant material and nice wear-resistant is our slurry pumps important character.

2. Metal Slurry Pump Parts material construction

	LINERS	IMPELLER	CASING	BASE	EXPELLER	EXPELLER RING	SHAFT SLEEVE	SEALS
Standard	Chrome Alloy Natural Rubber	Chrome Alloy Natural Rubber	SG Iron	SG Iron	Chrome Alloy or SG Iron	Chrome Alloy or SG Iron	SG Iron	Rubber and Nitrile
Options	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon	Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon	SG Iron Various grades	MS Fabricated Cast Iron	NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151	NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile	EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS	Ceramic Stellite Chrome Oxide Nordel Neoprene Viton

Slurry Pump Metal Parts

Pump Parts, Slurry Pump Metal Parts, Metal Slurry Pump Parts, Slurry Pump Fluid Parts, Slurry Pump Wet Parts

Shijiazhuang Naipu Pump Co., Ltd. , http://www.naipu-pump.com