2. The mechanical rod seals the new hard tungsten carbide material that is resistant to corrosion, and the pump enables the safe and continuous operation of the pump up to 80 () (hours or more.
3, the overall structure of a compact, small size, low noise, energy-saving effect is obvious, easy maintenance, no need to build a pump room, diving into the water to work, greatly reducing the project cost.
4. The pump seal oil chamber is equipped with a high-precision anti-jamming leak detection sensor, embedded in the stator winding thermal element, automatic protection of the pump motor.
5, according to user needs equipped with automatic control cabinet, the pump leakage, leakage, overload and over-temperature and other automatic protection, improve product safety and reliability.
6. Float switch can automatically control the start and stop of the pump according to the change of required liquid level, without special care, and it is extremely convenient to use.
7. The WQ series can be equipped with a dual-rail automatic coupling installation system according to the needs of users. It provides greater convenience for installation and maintenance. People do not have to enter the sump for this purpose.
8, can be used in full head, and ensure that the motor will not be overloaded.
9, there are two different ways of installation, fixed automatic coupling installation system, mobile free installation system.
Stamping parts: The most used in hardware processing refers to the molds for steel/non-ferrous metals and other plates at room temperature, which are formed into a specified shape by the pressure required for processing by a press. Automobile shock absorbers are mainly used to suppress the shock of the spring and the impact from the road surface when the spring rebounds after shock absorption. When passing on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will reciprocate, and the car shock absorber is used to suppress the jump of this spring. If the shock absorber is too soft, the body will jump up and down. If the shock absorber is too hard, it will bring too much resistance and prevent the spring from working properly. In the process of modifying the suspension system, the hard shock absorber should be matched with the hard spring, and the hardness of the spring is closely related to the weight of the car. Therefore, heavier cars generally use harder automotive shock absorber stamping parts. A device connected to the vibration-inducing crankshaft to counteract the torsional vibration of the crankshaft (that is, the phenomenon that the crankshaft is twisted by the impact of the ignition of the cylinder)
Stamping parts bracket,Shock Absorber Parts
Ningbo Huilexin Technology Co.LTD , https://www.oemshockabsorbers.com