Scraper filter market problem analysis

Guidance: The filter manufacturers are mixed. In the past two years, the common mechanical (scraper) self-cleaning filters in the market have enjoyed rapid market penetration, but there are many problems.

A variety of reasons may make customers feel less useable. Let's take a look at the professional with Xiaobian. - What is the staff of Yiqing Fluid Systems (Shanghai) Co., Ltd.?

1. Inaccurate selection , large output, low capital, high precision, and complex working conditions. We hope to spend less money to do more things; unscrupulous filter manufacturers cater to unreasonable requirements, and get the list first.

2, filter products failed, the filter opening rate is too high or too low / precision deviation / cleaning device can not effectively clean up impurities / for the pursuit of filtration capacity, one-sided increase the hole rate and frequency / sealing problems;

3, The filter design does not conform to the principle. The scraper and brush are used together or even with the function of recoil/sewage outlet is located on the side of the filter to form impurities. The second plugging of the filter/discharge outlet is even at the top of the filter/control box setting problem/blindness. Adopt the pressure difference principle;

4, the operation is not correct, most of them do not have a complete operating procedure, and the lack of production separation process before and after filtration;

5, sales service is not professional, most of the filter manufacturers of technical personnel only drawing, behind the door to build a car; sales staff instill inexplicable concepts in front of the customer, get the customer to leave after the winner;

6, the demand is not clear, that adding a simple filter, you can solve the solid-liquid separation problem in the entire process.

Source: Yiqing Fluid Systems (Shanghai) Co., Ltd.