![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
When the programmer of the boring and milling machining center prepares and designs a machining program, some problems will inevitably occur. If these problems are not discovered in time, they will affect the quality of the processing during processing, and sometimes have some serious consequences. Therefore, it is necessary to test the programmed procedures. The two-dimensional image shows the machining path of the tool in the plane of the fire or the plane of the sky. It is intuitive for the tool path that only processes one plane, and can clearly detect the tool path; the coordinate size in the image is compared with the size of the drawing and the program. Comparison makes it easy and quick to check if the dimensions are correct.
The three-dimensional image display is superior for machining a workpiece with multiple planes. It can display the correlation between the various planes, as well as the processing depth of each plane, and can observe the actual problem of whether the processing between the planes interferes, etc.; The tool path can be reflected from multiple angles and the programmer can verify the correctness of the program based on the tool path.
Trial Run Function A tested program is also required to be commissioned before it is officially processed. The trial run is to not clamp the workpiece, the spindle cutter is under the control of the program, and the empty cutter is trial run. This helps the programmer to find problems in the actual machining process, such as whether the tool is too large, whether it will affect the tool change, and whether it will affect the travel of each motion axis. After the above aspects, we can form a program that can process high quality and high precision. The detection of the MAHO boring and milling center is a typical method, and other types of machining centers can refer to the inspection. Thanks to the use of special spreaders, the jacket has small deformation, light weight, flexible driving and accurate positioning. This hot-packing scheme has been successful.
(Finish)
Element Struction
FPM seal ring ensure the air-tightness between filter head and filter element, to achieve a positive filtration Effect.
Double stainless steel support layer to ensure the fulter element strength, deep bed Multi-wrap borosilicate glass microfibre large flow passage prevent high pressure drop.
With 96% porosity high dirt holding capacity, lifespan up to 6000 to 8000 hours. The general differential pressure is 0.17~0.25 kg/cm, less than 0.65kg/cm.
The element cover is made of PA+GF, free from deformation at 1.8Mpa pressure and high temperature of 240℃ and capable of resisting general acid and alkali chemical corrosion and withstanding the severe compressed air environment.
Special material for the outer layer of filter element, with strong hydrophobic and oilphobic, prevent the oil or water being blown away and received drying and filtering effect.
Industrial Air Filter Cartridges,Industrial Water Filter Cartridge,Compressed Air Filter Element,Activated Carbon Filter Cartridge
Hongrijia Depurate Facility Science & Technology Co.,Ltd , https://www.yukafilter.com