Common failures and remedies for garbage trucks

I. Reasons for common failures of garbage trucks

1 Oil leak.

2 The crankcase ventilation line is blocked.

3 valve stem and valve catheter wear.

4 The valve stem seal is worn or damaged.

5 The piston ring is reversed during maintenance to allow oil to enter the combustion chamber.

6 The piston ring is stuck in the ring groove due to the glue stuck or the piston wears badly.

7 improper use of lubricating oil, viscosity is too small.

8 Lubricating oil too much.

Second, garbage truck common troubleshooting methods

1 Repair or replace leaking parts.

2 Check the crankcase ventilation is good.

3 Check the gap between the valve stem and the catheter and replace it with new ones if necessary.

4 Check valve stem oil seal wear and replace if necessary.

5 Install the piston ring correctly.

6 Check the degree of wear of the piston ring and how easy it is to rotate in the ring groove.

7 Select the lubricant according to the factory requirements.

8 Fill the lubricant according to the standard



For Metal Tube And H Beam

No matter what XUANLIN CNC Laser Cutting machine you choose, you are assured of reliable operation, consistent accuracy, and high control over the production process for top-quality laser cutting results.
For easy entry into the world of fiber laser cutting to ultra-high-speed cutting or extra-large sheet processing, a range of highly efficient fiber Laser Cutting Machines have the flexibility to meet today`s production needs.

Tube For Laser Cutting Machine,Small Tube Laser Cutting Machine,Tube Laser Cutting,H Beam Fiber Laser Cutting Machine

JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncfiberlaser.com

Posted on