Explosion-proof lighting cavity electrical structure mainly includes what content
1. Electrical components The electrical components should meet the requirements of relevant national standards, be able to withstand the operating temperature of the lamp cavity for a long period of time, provide electrical parameters that are compatible with the light source, and be compatible with the requirements of various explosion-proof lamps.
2. The design of wiring chamber wiring chamber structure dimensions must meet the specific explosion-proof performance requirements, and it should be easy to connect, leaving space for the bending radius of the wire, to ensure that the correct clearance after the clearance and creepage distance meet the relevant standards, wiring chamber wall and The inner wall of the metal shell that may generate sparks during normal work must be painted with arc paint.
3. Connections and terminals
1 The connecting piece, insulation bushing and terminal shall have sufficient mechanical strength to prevent damage during installation. The wiring should be solid and reliable, prevent loosening, and can not be loosened due to vibration, heat, thermal expansion and contraction of the conductor and insulation.
2 The power connector should be designed so that if multiple stranded conductors are connected, if the cable head comes out of the terminal, it will not touch the surrounding metal parts.
3 Terminals should take measures to prevent loosening to prevent the wire at the root of the terminal from being twisted. It is not allowed to press the connecting wire directly with the screw head, which will easily damage the wire head.
Explosion-proof electrical appliances which types
The types of explosion-proof electrical appliances are divided into two categories according to the specific use environment: one is for underground coal mine electrical equipment and the other is for factory electrical equipment. According to the characteristics of sparks, arcs, and dangerous temperatures generated by electrical equipment and measures taken to prevent them from igniting explosive mixtures, the following eight forms are available:
(1) Flameproof type (mark d); is an electrical device with a flameproof enclosure that can withstand the explosion pressure of the internal explosive gas mixture to prevent the internal explosion from propagating to the explosive mixture around the enclosure. Suitable for any place of explosion hazardous locations.
(2) Increased safety (mark e). Under normal operating conditions no arcs, sparks, or high temperatures sufficient to ignite the explosive mixture will occur. Various measures are taken structurally to increase safety to avoid arcs, sparks and high temperatures under normal and recognized overload conditions.
(3) Intrinsically safe (marks ia, ib): IEC76-3 spark test device is used. EDM and thermal effects resulting from normal operation or specified fault conditions do not ignite the specified explosive mixture. This kind of electrical equipment is classified into ia and ib according to the place of use and the degree of safety. The ia rating device does not ignite the explosive gas mixture during normal operation, one failure, and two failures. An ib rating device cannot ignite an explosive gas mixture during normal operation and failure.
(4) Positive pressure type (mark p): It has a positive pressure enclosure that can maintain the internal protective gas, that is, the pressure of fresh air or inert gas is higher than the surrounding explosive atmosphere, preventing the external mixture from entering the enclosure.
(5) Oil-filled type (mark U): It is an oil or a part of the electrical equipment, so that the equipment cannot ignite the explosive mixture above the oil surface or outside the housing, such as a high-pressure oil switch.
(6) Sand-filled type (mark q): The sand material is filled in the outer shell so that under the conditions of use, arcing, flame propagation, shell wall, or sand material surface overheating of the shell cannot ignite the surrounding explosive mixture.
(7) Non-spark type (mark n): Under normal operating conditions, the surrounding explosion mixture will not ignite, and generally no ignition failure will occur.
(8) Special type (marker s): Refers to electrical equipment that does not belong to any of the above categories, but uses other special explosion-proof measures. Such as the filling of sand and sand type equipment is such.
Welding Rebuild On Vertical Mill Components
The raw material is uniformly fed through the feeder at the bottom of the hopper, and then raised to a suitable height by the bucket elevator, and then sent to the mill through the feeding pipe for grinding, and the ground material enters the powder classifier and is produced by the hot air furnace. Hot air, at the same time dry and grade the material, the unqualified material is poured into the grinding, the qualified fine powder is sent to the powder collector, and then transported to storage. Through the conveyor.
Welding Recondition is the best way to reduce cost through increase working life of your equipment. Take Vertical Roll Mill for example, the Coal Vertical Roll Mill (VRM) is an air scanning, medium speed vertical mill with an integrated classifier. It pulverizes coal by applying a hydraulically loaded grinding pressure through three grinding rolls to a rotating bed of coal. The grinding pressure can be adjusted to take into account changes in coal grindability and desired product fineness.
Application_Cement Plant, Power Generation, Steel Mill, Chemical Industry, non-metallic minerals and other industries. It is used to grind granular and powdered materials into powders with the required fineness.
It can cover the grinding machine table of various sizes and styles. We can rebuild the table internally or on site according to your needs. We also offer cast steel table replacement and a suitable overlapping section to ensure fit.
Grinding Table Liner Welding Recondition, Wear Resistant Casting Spare Parts Welding Rebuild, Cement Mill Grinding Table Welding Rebuild
HuiFeng Wear Resistant Group , https://www.hpwearsolution.com
![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)