The National Development and Reform Commission issued the "Detailed Rules for the Implementation of the Energy-Efficient Leaders of Lighting Products"

On December 18, the National Development and Reform Commission issued the Notice on Printing and Distributing the Implementation Rules for Energy-Efficient Runners and the Selection of Energy-Efficient Runners for Five Kinds of Products, such as Electric Washing Machines and Lighting Products. Among them, the “Detailed Rules for the Implementation of Energy-Efficient Runners in Lighting Products” is as follows: On December 18, the National Development and Reform Commission issued the “Notice on Printing and Implementing the Implementation Rules for Energy-Efficient Runners and the Selection of Energy-Efficient Runners for Five Kinds of Products, such as Electric Washing Machines and Lighting Products”. The "Detailed Rules for the Implementation of Energy-Efficient Runners in Lighting Products" are as follows: Implementation Rules for Energy-Efficient Runners in Lighting Products I. Application Scope and Conditions (1) Apply for products as high-efficiency lighting products, including specific product names and products for energy-efficient runners. Specifications meet special requirements (see Annex 1). (2) The products that apply for the energy efficiency leader of lighting products must meet the following requirements: 1. Adopt advanced and efficient energy-saving technologies and parts, according to the test methods specified in the current version of the energy efficiency standard, the energy efficiency of the product reaches energy efficiency level 1: 2. National safety standards require obtaining a safety certification; 3. Filing through an energy efficiency label (if an energy efficiency labeling system has been implemented); 4. In the past year, the product quality supervision and spot check and energy efficiency label special inspection, the product is not qualified; 5. Production in mainland China; specific products must meet special requirements (see Annex 1). 2. Enterprises applying for enterprise conditions to apply for the energy efficiency leader of lighting products must meet the following requirements: (1) an independent legal person registered in mainland China; (2) having the legal use rights of the independent brand or brand of the applied product, the same brand can only Apply by a company; (3) Have a sound product sales network, quality management system and good after-sales service capabilities; (4) Products that are promised to be applied for mass production. Within one year from the date of publication, the shipments of individual product specifications in mainland China meet the special requirements (see Annex 1). III. Organization and implementation (1) The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) organize the product declaration and selection of energy-efficient products for lighting products, determine the scope and conditions for applying for products, apply for enterprise conditions, and implement the energy efficiency leader system for lighting products. Special requirements (see Annex 1) and selection criteria (see Annex 3). Local energy conservation authorities, industrial and information administration departments, and quality and technology supervision departments shall organize local enterprises to declare. (2) The applicant company fills in the application report of the energy efficiency leader of the lighting product as required (see Attachment 2) and submits the application materials. The number of models applied for the product meets the special requirements (see Annex 1). (3) The applicant enterprise shall submit the application materials to the provincial-level energy-saving competent department, the competent department of industry and informationization, and the quality and technical supervision department at the locality, after being examined by the provincial-level energy-saving competent department, the industrial and informationization department, and the quality and technical supervision department. Submitted to the National Development and Reform Commission, the Ministry of Industry and Information Technology, and the General Administration of Quality Supervision, Inspection and Quarantine. (4) The National Development and Reform Commission, the Ministry of Industry and Information Technology, the General Administration of Quality Supervision, Inspection and Quarantine, together with the relevant departments, organize experts to follow the criteria for the selection of energy efficiency leader of lighting products (see Annex 3), the energy efficiency level of the declared products, major technologies and enterprise innovation and promotion. Ability to score, each product selects the top 30 product models as alternative products. The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the General Administration of Quality Supervision, Inspection and Quarantine commissioned third-party organizations to organize testing or verification of energy efficiency and other quality performance of alternative products. Based on the results of testing or verification, the initial evaluation results are reviewed to determine the final ranking. The specifications select the top 10-20 product models to be energy-efficient front-runner products. (5) The results of the selection shall be publicized to the public on the official website of the National Development and Reform Commission, the Ministry of Industry and Information Technology, the AQSIQ and relevant media, and the publicity shall be no less than 10 working days. For products that have no objection to the publicity, the National Development and Reform Commission, the Ministry of Industry and Information Technology, and the General Administration of Quality Supervision, Inspection and Quarantine announced the annual lighting product energy efficiency leader, product specifications, models, energy efficiency indicators and standards. (6) Enterprises shall actively organize the promotion of energy-efficient front-runners in accordance with the requirements of the commitments, and ensure the production, market supply and after-sales service of energy-efficient front-runner products. (7) The promotion of energy-efficient runners' products shall be assessed on an annual basis. After the catalogue is published for one year, the company shall submit the lighting product promotion leader's promotion report (see Annex 4) to the National Development and Reform Commission within three months. (8) The energy-efficiency front-runner declaration and selection will be organized once a year, and the products of the same model can be repeatedly declared in different years. Fourth, the energy efficiency leader logo style and use (a) listed in the leader's catalog of products should be printed on the energy efficiency label body directly printed energy efficiency leader logo (if the implementation of energy efficiency labeling system), or the energy efficiency leader logo directly printed on On the product body (if the energy efficiency labeling system is not implemented). The logo style is shown in Figure 1 and Figure 2. (2) Where the previous provisions are inconsistent with these Rules, these Rules shall prevail. V. Incentives (1) The state encourages technology research and development, publicity and promotion of energy-efficient front-runner products, giving honorary rewards and policy support to energy-efficient front-runners, and providing appropriate policy support for energy-efficient front-runners in all countries. Product promotion creates a better market space. (2) The State will incorporate the runner-up products into the government procurement list of energy-saving products and implement priority procurement. (3) The fixed assets investment project is preferred to use energy efficiency leader products. (4) The energy-saving renovation project supported by the central infrastructure investment and the central financial fund will give priority to energy-efficient front-runner products. (5) The state establishes a mechanism for linking energy efficiency front-runner indicators with mandatory national standards. According to the development of energy-saving technologies for efficient lighting products and changes in market energy efficiency levels, energy efficiency leader indicators are included in the energy efficiency standards for such products in a timely manner. (6) The state will increase publicity efforts, organize the launching of energy-efficient front-runners' conferences and promotion conferences, focus on promoting energy-efficient front-runner products and related enterprises, establish benchmarks, promote typical models, commend advanced, and create a good atmosphere for system implementation. Local publicity and promotion mechanisms will be established to increase the promotion and promotion of energy-efficient front-runner products. VI. Supervision and Management (1) The National Development and Reform Commission, together with the Ministry of Industry and Information Technology and the General Administration of Quality Supervision, Inspection and Quarantine, commissioned a third-party agency to conduct an information check on the promotion of energy-efficient front-runner products, and conduct supervision and spot checks on product energy efficiency and other quality performance in accordance with Annex 3. . (2) The energy efficiency labeling authority shall objectively and fairly carry out the record of the energy efficiency leader's products and conduct follow-up investigation on the use of the energy efficiency leader's logo. The third-party testing organization shall strictly follow the relevant regulations and conduct testing according to the testing methods and requirements stipulated in the mandatory national standards for energy efficiency to ensure that the testing process and results are objective, fair and accurate. (3) To supervise and check the energy-efficiency leader products whose quality is unqualified, and cancel the qualification for the next year's application, and expose it. (4) It is strictly forbidden to forge or use the energy-efficient leader's logo, and to use the energy-efficiency leader's logo to make false propaganda and mislead consumers. Enterprises that provide false materials and carry out false propaganda will be included in the negative list, and they will not be allowed to apply for energy-efficient products for terminal energy products within three years. For enterprises that have not completed the promised shipments and have not submitted the promotion report on time, the qualifications for the next year's declaration of such products will be cancelled. For testing institutions that issue false reports, the test results issued by them will no longer be accepted within three years. VII. Supplementary Provisions (1) The validity period of these Rules is 5 years. (2) These Rules shall be implemented as of the date of promulgation.

Nox Sensor 12V For FUSO Car

Nox Sensor 12V For FUSO Car,FUSO automobile sensor 12V nitrogen and oxygen sensor is suitable for FUSO tail gas treatment. Nitrogen and oxygen sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication. The effects of nitrogen and oxygen sensor damage are as follows: 1. If the nitrogen and oxygen sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened. 2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit. 3. The damage of nitrogen and oxygen sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,. Once a problem occurs, the nitrogen and oxygen sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.

Nox Sensor 12V For FUSO Car, Fuso Auto Parts 12V nitrogen and oxygen sensor,Fuso Automobile Sensor 12V nitrogen and oxygen sensor,Mitsubishi Fuso Parts 12V nitrogen and oxygen sensor

Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com