Recently, the speech of Wu Xinxiong, director of the National Energy Administration, at the 13th Five-Year Energy Planning Working Conference was announced. Wu Xinxiong’s speech revealed that the 13th Five-Year Energy Plan is planned to be completed in about two years. This year, the main work will be carried out. Before March 2016, it is the drafting stage of the 13th Five-Year Plan for National Energy Development. From March 2016 to May 2016, the 13th Five-Year Plan for Energy Development will be reported to the State Council. In terms of new energy, Wu Xinxiong said that during the 13th Five-Year Plan period, the proportion of renewable energy should be significantly increased. By 2020, photovoltaic power generation and wind power installed capacity will reach 100 million and 200 million kilowatts respectively. The price of wind power is equivalent to that of coal-fired power grid. It is equivalent to the sales price of electricity grid, and it solves the problem of abandoning wind, abandoning water and abandoning light. Wu Xinxiong said in his speech that it is necessary to strengthen power supply and power grid planning, actively develop smart grids, and scientifically arrange peaking, frequency modulation, and energy storage supporting capabilities. On August 6, it was learned from sources close to the National Development and Reform Commission that the policy of lowering the on-grid price has been finalized, and the downward adjustment is around 0.01 yuan/kWh. The reduction rate varies from region to region. The time for the specific downward adjustment has not yet been finalized. The source said that the downward adjustment of the on-grid tariff was mainly due to the recent decline in coal prices. The coal-electricity linkage mechanism is the main factor in this price adjustment. Through the speech of Wu Xinxiong, director of the National Energy Administration, Xiaobian, as a member of the lighting industry in the energy-saving industry, saw the general direction of the country, the future LED lighting market and the smart lighting market that is now booming. To this end, some analysis was made on the trend of the national energy conservation policy. In the speech, in terms of new energy, Wu Xinxiong said that during the 13th Five-Year Plan period, the proportion of renewable energy should be significantly increased. By 2020, photovoltaic power generation and wind power installed capacity will reach 100 million and 200 million kilowatts respectively, and the price of wind power will be equivalent to that of coal-fired power. The photovoltaic power generation and the power grid sales price are equivalent, and the problem of wind abandonment, water abandonment and light abandonment is effectively solved. Whether it is photovoltaic or not, wind power is ultimately used for terminals. As China's terminal consumer market is the lighting market, the policy of using national policies in the original power generation of the lighting market has indeed played a role in energy conservation, but the use of energy-saving products on the terminal page will make energy saving a real energy saving. Nowadays, LED is considered to be the most energy-saving lighting source in the 21st century. Under such a large policy direction, the LED lighting market will reach the peak of the market in 3 years and continue to extend for 5-10 years. Xiaobian on the LED lighting market In 2014, the industry made an analysis of the whole industry chain from the upper, middle and lower reaches. Upstream: LED chip market is booming in the first half of the year. In 2014, the lighting market showed explosive growth, driving the global LED market to show a growing trend. The domestic LED lighting market is rapidly opening up in line with international trends, and the industry's prosperity continues to increase. At the same time, driven by the strong demand of the downstream lighting market, the LED upstream chip industry achieved rapid growth. In the first half of the year, the overall performance of LED chip companies was good, and the new trends displayed on the chip side were even more remarkable. The production capacity is full, and the stock market is like a mirror. The fine microwave will reflect the development status of enterprises and industries. The LED chip market is no exception. In the first half of the year, the stock market of listed chip companies has been all the way. From the first quarter of 2014 results of LED chip listed companies, it can be seen that LED epitaxial chip listed companies, in addition to Dehao Runda for losses, Sanan Optoelectronics, Huacan Optoelectronics, Ganzhao Optoelectronics and Guoxing Optoelectronics are profitable. Dehao Runda believes that the loss is due to the decline in gross profit margin of products and the substantial increase in financial expenses. Among them, the Sanan Optoelectronics Announcement, which has the largest profit growth, said that the strong market demand and the company's main production equipment MOCVD production are the reasons for the growth of the performance. Similarly, Guoxing Optoelectronics also attributed the growth to the increase in sales revenue, indicating an increase in market demand. It is the main cause. Bian Difei, vice president of Huacan Optoelectronics, said that the downstream market demand is relatively strong, and 37 MOCVD equipments in the Wuhan base are basically in full production. The LED chip market is not good, not only depends on the chip company, but also depends on how its customers are producing. Sanan Optoelectronics customer Guoxing Optoelectronics Sales Department related person in charge said that Sanan Optoelectronics is its chip supplier, due to the relatively bright LED lighting market in the first half of the year, Guoxing Optoelectronics enterprise operating rate is 100, plus the company itself has expanded Production and shipments have doubled compared to last year. At the same time, the LED chip companies in Taiwan, represented by Jingyuan, Yuan, New Century, Dingyuan, Taigu, etc., have different performances in 2013, but with the vane meaning of the wind vane The overall trend of the industry's overall recovery is obvious. In the first quarter of this year, the performance of Jingyuan Optoelectronics increased significantly. The first quarter revenue reached 6.24 billion yuan (NT), which also set a record high level. The second quarter capacity was fully loaded, and new products were shipped, making the products Combined optimization, the second quarter results will be even better than the first quarter. Lin Yiguang, the assistant to the Optoelectronics Marketing Center, said.
Machining Brass
Brass has excellent CNC Machining Turning performance, high-speed machining turning under the brass can get excellent surface finish. Our technical team has very good experience in machining brass, machining brass including brass plate, brass rod, brass tube. Brass hardware parts has high strength, good plasticity in hot state, good plasticity in cold state, good machinability, easy welding and good corrosion resistance. Brass parts are very durable. It is electrically conductive and does not usually corrode or deteriorate over time. Thus brass is often used to produce products with longer service life. Machining brass parts Widely used: pipes, radiators, ship parts.
Machining Brass, Brass Machined Parts, Perfessional Brass Parts Machining, Machining Brass Conponents, Brass Parts Machining
Hong Kong RYH CO., LTD , https://www.szcncmilling.com