How the lighting car works

Lighting car (Light tower) is generally played in field operations at night and emergency rescue a significant role, for the case of sudden accident sometimes repair and exception handling and the like, the main role is to provide a field illumination light source in the case where there is no other mobile lighting . Lighting cars can be divided into two types of ball-type lighting cars and conventional cars, the more common brands are Beili and powerbaby.

The light source of the lighting vehicle is generally a metal halide lamp, and its advantage is that light is mainly emitted through the discharge of air in the light emitting tube, so there will be no broken wire, and the overall service life will be longer. And comparing this metal halide lamp with the same power iodine tungsten lamp will find that its brightness reaches six times that of iodine-tungsten lamp, and its service life is five times that of iodine-tungsten lamp. The overall power consumption is only iodine One-fifth of a tungsten lamp is enough to illustrate the benefits of using a metal halide lamp as a material.

The body assembly and body poles plus the lamps form a lighting car, which is generally equipped with two or four wheels and anti-roll brackets. The body pole mainly uses the winch and hydraulic device to raise or lower the overall height of the pole, and the pole is used to place the lamps so that each pole on the pole can freely rotate horizontally from What makes it possible to illuminate in every direction.

Most of the commonly used lighting vehicles on the market today are cast light fixtures, and such lighting is far away. Most of these lighting fixtures are in areas where ordinary roads, enclosed highways, and airport terminals need to be relatively closed but are in need of intense light and long-distance lighting.

The ball-type lighting vehicle adopts a lighting ball type lamp that adopts better light transmission and relatively high waterproof performance, and its material is selected from imported aerospace synthetic fiber materials. It is characterized by good anti-glare, both strong light and no shadow, but also a wide range of lighting in all directions. Therefore, this kind of lighting registration is very suitable for occasions where people, such as national highways and open highways, need to ensure safety.

Stainless steel thick-film heating tubes of GIDAPE^®ANDETONG^® series manufactured by JIEDA company are tubular structures, which allows rapid water flow and instant heat carrying. Under the same conditions, GIDAPE^® ANDETONG^® series has many application advantages, such as large heating area, high heat conduction efficiency (≥98%), rapid thermal response (≥80 â„ƒ~150℃/S), long working life (≥10000 hours), etc.

 

JIEDA 3300W Thick Film Heating Element consists of stainless steel thick-film heating pipe, outer protective shell, water inlet and outlet joints, anti-dry thermostat, power cord, etc. It can be fixed on sides, with 10mm,16mm,G1/2 diameter connecting orifice.

This type of heating body is an intelligent temperature control thick film heating body. It can work with the PCB circuit control system, so that the pre-set temperature and hot water quantity can be decided.

 

At present, thick film heating tube(heating body) of GIDAPE^®ANDETONG^® series has been successfully applied to fluid heating field, such as: Instant Hot Water dispenser, quick hot water boiler, pipeline machine, electric heat faucet, kitchen under sink water heater, sous vide, dishwasher, milk machine, coffee machine, dishing industrial equipment and so on.

3300W Electric Heating Element

3300W Electric Heating Element,Ptc Heating Element ,Instant Heating Element ,Tubular Heating Element

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.gidaheater.com