Frohnmayer develops electric motorcycles for urban residents

In a sense, using a typical two-ton fuel truck to go shopping around the town is extremely inefficient. Car entrepreneur Marc Frohnmayer developed an electric car Arcimoto SRK. The head of Arcimoto, Frohnmayer, claimed that it was a three-wheeled, two-seat electric motorcycle that had enough space to carry groceries. It also looks cool, it is fun to drive and even the price will be very affordable. Although Frohnmayer declined to disclose the actual price of the car, he said that SRK will spend less than $20,000.
Arcimoto will begin the SRK public beta on 15 pilot sites in November. Improvements in design will follow, followed by production targets in the latter part of 2016. Frohnmayer stated that the University of California, Berkeley will help with a certain degree of electrical engineering and computer science. Frohnmayer said: "We still have a lot of work to do, SRK will be the first to bring affordable and practical electric cars to the general public, SRK's purpose is to target those who mostly drive within a short distance, but also green and fashion sense Urban residents.” He added: “We did not try to build an electric car. It is totally different from an electric car. It is smaller than a normal car, but it still solves the environmental problems caused by today’s cars. ”

Injection Molding Machine For Make Up Bottle

Features of servo injection molding machine:

1. Faster response and higher accuracy. The MYTAO servo Energy-saving Injection Molding Machine only needs 30ms from standstill to reach the rated speed. The reproducibility of low-pressure and low-flow is ±0,5%, and the hysteresis of the frequency conversion motor is avoided. Compared with the traditional injection molding machine, the speed response of its pressure and flow is about 0,03s, which can not only significantly improve the repeat accuracy, but also the position accuracy can reach within 0,1mm.

2. The molding cycle is shorter and the efficiency is higher. Thanks to the servo motor, it takes less time to start and stop each movement of the injection molding machine, and after the proportional valve is eliminated, the hydraulic leakage is reduced and the speed is faster.

3. The energy consumption of the motor is lower. Compared with the traditional asynchronous motor with an efficiency of about 80%, the efficiency of the servo motor of this equipment with the same power can reach more than 90%, which saves energy.

4. When the traditional motor starts, its current is 5 times that of normal operation, and the ,MYTAO servo energy-saving injection molding machine adopts the soft start mode, which will not cause an impact on the power grid.

Injection Molding Machine For Make Up Bottle,Pet Injection Blow Molding Machine,Semi Automatic Blow Molding Machine,Plastic Bottle Injection Molding Machine

Ningbo Rhea Machinery Co., Ltd. , https://www.mytao-global.com